Co-axial dual-core resonant leaky fibre for optical amplifiers
نویسندگان
چکیده
We present a co-axial dual-core resonant leaky optical fibre design, in which the outer core is made highly leaky. A suitable choice of parameters can enable us to resonantly couple power from the inner core to the outer core. In a large-core fibre, such a resonant coupling can considerably increase the differential leakage loss between the fundamental and the higher order modes and can result in effective single-mode operation. In a small-core single-mode fibre, such a coupling can lead to sharp increase in the wavelength dependent leakage loss near the resonant wavelength and can be utilized for the suppression of amplified spontaneous emission and thereby gain equalization of an optical amplifier. We study the propagation characteristics of the fibre using the transfer matrix method and present an example of each, the large-mode-area design for high power amplifiers and the wavelength tunable leakage loss design for inherent gain equalization of optical amplifiers.
منابع مشابه
Birefringence analysis of multilayer leaky cladding optical fibre
We analyze a multilayer leaky cladding (MLC) fibre using the finite element method and study the effect of the MLC on the bending loss and birefringence of two types of structures: i) a circular-core large-mode area structure and ii) an elliptical-small-core structure. In a large-mode-area structure, we verify that the multi-layer leaky cladding strongly discriminates against higher order modes...
متن کاملNovel optical fiber designs for gain flattened optical amplification and dispersion compensation
Optical amplifiers and dispersion compensators form important components of any DWDM system and the overall performance of the system depends critically on the spectral properties of these and other components in the link. This has led to the development of optical amplifiers and fiber based dispersion compensators with specific wavelength dependent characteristics. Dual concentric core fibers ...
متن کاملOptimise the Gain of Optical Signal by SOA with Saturated ASE and Unsaturated ASE
Optical Amplifiers are essentials components in long haul fibre optic system. An amplifier is a electronic device that can increase the power of signal. An Optical Amplifier is effectively the opposite of attenuator while Optical Amplifiers provide gain and attenuator provides loss. When a signal travels in a optical fibre medium the signal suffer from various losses such as fibre losses, atten...
متن کاملManufacturing the Future Conference 2012
Although fabrication technologies of Microstructured Optical Fibres (MOFs) fibres have matured at an impressive rate over the past ten years, these fibres are widely perceived as “challenging” and some key issues are still outstanding in order to improve their manufacturability. One such issue revolves around methods to improve structural control during the fibre draw. Structural control is of ...
متن کاملComparative Gain Analysis of Erbium and Ytterbium Doped Optical Fibre Amplifiers
In the present work, gain of EDFA (Erbium Doped Fibre Amplifier) and YDFA (Ytterbium Doped Fibre Amplifier) are analyzed based on their performance parameters. The effects of pump laser power, length of doped fibre that used for amplification and the wavelength of the input signal on the gains of the optical amplifiers is examined. EDFA exhibits maximum gain of 48db around 1550nm regions with p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008