Degradation of NO using photocatalytic coatings applied to different substrates
نویسندگان
چکیده
This article deals with the degradation of NO present in the air by means of a photocatalytic oxidation process based on TiO2 nanoparticles incorporated in a polymer-matrix-based coating. The experimental set-up consisted of a flow type reactor adapted from the ISO 22197-1 standard. NO2 in the gas phase, and nitrate ions adsorbed on the photocatalytic surface were detected as finals products. Various parameters influencing the NO degradation efficiency were studied: the coating composition, the substrate nature, the initial concentration of NO, the polluted air flow rate and the humidity. Compared to glass, the use of mortar as the substrate enhanced the photocatalytic performance of coatings by reducing the generation of gaseous NO2 as a by-product.
منابع مشابه
Mathematical modelling of an annular photocatalytic reactor for methylene blue degradation under UV light irradiation using rGO-ZnO hybrid
The application of heterogeneous photocatalysis in industrial scale has been hindered by a lack of simple mathematical models that can be easily applied to reactor design and scale-up. This work intends to use a simple mathematical model for predicting methylene blue (MB) degradation in a slurry-annular photocatalytic reactor using zinc oxide (ZnO) hybridized with reduced graphene oxide (rGO)-Z...
متن کاملKinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process
Sol-gel process was chosen to produce a photocatalytic film to degrade methylene blue. In order to study structural and morphological properties of the coatings, a base sol of TTIP, I-PrOH, and DEA was prepared. Then with addition of 45g/L PEG 2000, 30g/L TiO2 and 15g/L PEG 2000 + 30g/L TiO2, to the base sol, three other sols were produced. The results of this study indica...
متن کاملThe Effect of thickness parameter and Fluorine Dopant on Photocatalytic performance of TiO2 thin films
In this study, Pure and doped titania sols with Fluorine (F/Ti:0.06) dopant, were prepared by sol-gel method and Ammonium Fluoride(NH4F) as the precursor. They were deposited on glass substrates (soda lime) in a certain(optimum) nanometric thickness by the dip coating method. Coated samples were dried and calcined under the specific rate. Phase composition and optical properties of coatings wer...
متن کاملReactive Magnetron Sputter Deposition of Bismuth Tungstate Coatings for Water Treatment Applications under Natural Sunlight
Bismuth complex oxides, in particular, bismuth tungstate, have recently attracted attention as promising photocatalytic materials for water treatment processes. In the present work, photocatalytic bismuth tungstate films were prepared by pulsed direct current (DC) reactive magnetron sputtering of Bi and W targets in an Ar/O2 atmosphere onto spherically-shaped glass beads. The uniform coverage o...
متن کاملPreparation of polyacrylonitrile – titania electrospun nanofiber and its photocatalytic dye degradation ability
In this paper, polyacrylonitrile PAN - titania TiO2 electrospun nanofiber PAN/TiO2 nanofiber was prepared via a facile electrospinning method. The characteristics of the PAN/TiO2 nanofiber were investigated using SEM and FTIR. The nanofiber showed retained nanofiber structures and high photocatalytic efficiency under UV light for the degradation of Direct Red 80 DR80 and Direct Red 23 DR23 in w...
متن کامل