Effect of Hardness of Water on Fixation and Total Wash off Percentage of Reactive Dyes When Applied to Cellulosic Fiber
نویسندگان
چکیده
Dye-house water quality is the most important parameter to be confirmed before dyeing; precisely the presence of metal content i.e. Hardness. This research will investigate & analyses the impact of separate hardness (i.e. Calcium, Magnesium & Iron) on particular „Turquoise‟ (C.I. Reactive Blue 21) & a „High Exhaustion‟ class (C.I. HE Red 120, C.I. HE Yellow 84) of Reactive dye on cotton knitted-fabric. From evaluation of dyed fabric the range of metal content is sorted out where the quality starts to fluctuate as distinctive visible & spectral change of shade & fixation rate of the dye molecules has been found. The result of the work will help for further projection about water quality degradation in upcoming years & its effect on dyeing behavior, also the sustainability of present dyeing process to cope with the ever degrading quality of water.
منابع مشابه
An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes
There is an increasing demand for air-dry performance of fluorocarbon finished materials. Thus, dyeing with different types of reactive, mono, bi, and multi-functional, dyes was evaluated as a novel treatment to create correct surface interface to maintain fluorocarbon performance without ironing or tumble drying. The effects of pre-treatment on fluorocarbon finishing of cotton fabric, a cellul...
متن کاملThe Effect of Reactive Dye Structure on the Ink-Jet Printing of Cotton
The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...
متن کاملA Comparative Study on the Dyeability of Stabraq (Milkweed) Fibers with Reactive Dyes
In this work, raw fibers of a local species of stabraq (milkweed) were scoured, bleached and blended with cotton fibers with a ratio of 75/25 (cotton/stabraq). The improved stabraq fibers, scoured and bleached cotton and the blended fibers were spun into fine yarns and then they were subjected to dyeing with two types of reactive dyes namely, cold brand and high exhaustion brand reactive dye at...
متن کاملEvaluating the Effect of Reactive Dye’s Structure and Penetrant Type on the Fastness of Ink-Jet Prints
The purpose of this study was to investigate the effect of the reactive dye structure and type of penetrant in ink formulation on paper ink-jet printing. Different type of papers, which have same grammage was printed upon with three commercial reactive dyes, CI Reactive Blue 49 Ink 1, 4, CI Reactive Blue 21 Ink 2, Ink 5 and CI Reactive Blue 19 Ink 3, Ink 6, which are based on different reactive...
متن کاملEvaluation Of Aftertreatments For Reusing Reactive Dyes
The use of reactive dyes has increased rapidly due to outstanding properties, growing consumption of cellulosic fibers, and decrease in the production of other application classes of dyes for cellulosics because of cost and health hazards. However, reactive dyes cause the greatest effluent problems for the dye industry. This study explored reusing these dyes in which the residual dyeings were d...
متن کامل