Investigation of Subcritical Fatigue Crack Growth in Gamma Titanium Aluminides
نویسنده
چکیده
The public reporting burden for this collection of inform.tion is estim.ted to .ver.ge 1 hour per response. including the time for reviewing instructions, se.rching existing d.t. sources, g.therin~ .nd m.int.ining the d.t. needed, .nd completing .nd reviewing the collection of inform.tion. Send comments reg.rding this burden estim.te or .ny other .spect of this collection of information, including suggestions for reducing the burden, to Dep.rtment of Defense, W.shington He.dqu.rters Services, Director.te for Inform.tion Oper.tions .nd Reports (0704-0188), 1215 Jefferson D.vls Highw.~, Suite 1204, Arlington, VA 22202-4302. Respondents should be .w.re th.t notwithst.nding .ny other provision of I.w, no person sh.1I be subject to .ny penalty for f.iling to comply with. collection of inform.tion if it does not displ.y • currently v.lid OMS control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 3. DATES COVERED (From To) /12. REPORT TYPE 05-26-2004 Final Technical Report 06-01-1998 to 05-26-2004 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Investigation of Subcritical Fatigue Crack Growth in Gamma Titanium NOO014-98-1-0390 ADMIN. MOD. # POOO07 Aluminides 5b. GRANT NUMBER
منابع مشابه
ROOM TEMPERATURE FATIGUE RESPONSE OF �-TiAl TO IMPACT DAMAGE
Gamma based titanium aluminides have received considerable attention recently as candidate materials in gas turbine applications, particularly low pressure turbine blades (1–3). Their low density and high specific stiffness, result in potentially significant weight savings in structures such as gas turbine engines if substituted for current materials. Two �-TiAl microstructures are predominatel...
متن کاملNUMERICAL INVESTIGATION OF CRACK ORIENTATION IN THE FRETTING FATIGUE OF A FLAT ROUNDED CONTACT
The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion....
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کاملIn vitro fatigue-crack growth and fracture toughness behavior of thin-walled superelastic Nitinol tube for endovascular stents: A basis for defining the effect of crack-like defects.
Endovascular stents made of the superelastic nickel-titanium alloy Nitinol are subjected in service to tens of millions of loading cycles and even "single-event" overloads, both of which can potentially result in fracture and/or complete failure of the device. A fracture-mechanics-based methodology can provide a means to quantify relevant material parameters critical to the design against such ...
متن کاملFatigue and corrosion fatigue properties of Ti-6Al-4V implant grade titanium alloy in Ringer solution
Nowadays modification of metallic biomaterials which are used as implants for bone and hard tissues replacement is considered as an important subject. In the current study, corrosion fatigue properties of Ti-6Al-4V alloy investigated via Rotating-Bending standard test method and then, the results compared with the fatigue properties of the specimens tested in the same conditions. Scanning elect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004