Burst Mode Switched Capacitor Voltage Converter Modeling and Design
نویسندگان
چکیده
An inductorless switched capacitor (SC) DC-DC voltage converter and a model based on the averaging technique are presented. The model was validated through circuit level simulations for a SC converter designed using CMOS 0.18 um technology, capable to deliver output currents up to 100 mA at a regulated low ripple 3.3 V output voltage, for input voltages between 1.8 V and 3.2 V and can be used for other design specifications as well. The converter automatically switches to burst mode when the output current decreases. The value of the output current is detected without the use of inductors or resistors.
منابع مشابه
Control of DC-DC Converters
A constant voltage regulator, to supply constant power loads, is realized using a Switched-capacitor converter. Exhaustive studies have been carried out to find the suitability of available control schemes and finally one control scheme investigated with (i) operation of the converter at different crossover frequencies (ii) operation of the converter at different phase Margins. Various operatin...
متن کاملSwitched - Capacitor Filter Based Type - III Compensation for Voltage - Mode Control of Switched - Mode Buck
BAWA, GAURAV. Switched-Capacitor Filter Based Type-III Compensation for VoltageMode Control of Switched-Mode Buck Converters. (Under the direction of Dr. Alex Q. Huang). In this dissertation, we propose a novel technique for the voltage-mode control of switchedmode fixed-frequency Buck Converters using Switched-Capacitor Filters (SCF). The salient features of the analog sampled-data Type-III fi...
متن کاملBidirectional Buck-boost Converter with Variable Output Voltage
An increasing number of manufacturing processes rely on ultra-high speed and accuracy machines. Piezoceramic actuators are being utilized as parts of such machines. So far, only linear and switched-capacitor power supplies have been used for driving piezoceramic actuators in such applications. This paper proposes a switch-mode power supply to reduce cost and increase system efficiency. In the p...
متن کاملA Design Method of Switched-capacitor Power Converters by Employing a Ring-type Power Converter
To solve the flexibility problem in conversion modes, we propose a design method for switched-capacitor (SC) power converters by using a versatile SC converter, and derive theoretical formulas to give circuit properties such as output voltage, power efficiency, etc. According to conditions specified by a user, the proposed converter offers the circuit structure realizing a DC-DC/DC-AC/AC-DC/AC-...
متن کاملNon-Isolated High Gain Buck Boost DC-DC Converters Adopting Switched Capacitor Cell for WSN Applications
This paper presents a high step up DC-DC converter to boost low voltage PV system voltage. The switched capacitor converter can obtain a high voltage gain but the line and load regulation is poor and the output voltage is not regulated. The output regulation of the non isolated switching mode DC-DC converter is excellent but the voltage gain cannot be too high.A combination method of the SC con...
متن کامل