CAl..lADIAN CODE PROVISIONS FOR DESIGN OF CONCRETE STRUCTURES PRESTRESSED WITH FRP
نویسنده
چکیده
This paper highlights the philosophy and concepts used for of the design of prestressed concrete structures prestressed by fibre reinforced polymer (FRP) tendons and rods proposed for the Canadian Standards Association (CSA) S806-00 Standard "Design and Construction of Building Components with Fibre Reinforced Polymers". The paper deals with the section of the code which applies to concrete beams and one-way slabs fully prestressed with FRP. The code approach for design, permissible jacking stresses, prestressing losses, transfer and development lengths, flexural resistance, shear reinforcement and bond characteristics are discussed
منابع مشابه
Ductility of Prestressed and Partially Prestressed Concrete Beam Sections
D analyses of structures responding elastically to ground motions recorded during severe earthquakes have shown that the theoretical response inertia loads are generally significantly greater than the static design lateral loads recommended by codes. Hence, structures designed for the lateral earthquake loads recommended by codes can only survive severe earthquakes if they have sufficient ducti...
متن کاملGuide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-03)
This paper reports on the key features of the “Guide for the Design and Construction of Concrete Reinforced with FRP Bars” issued by the American Concrete Institute (ACI). For new construction, FRP bars have been used as the internal reinforcement in concrete members to replace conventional steel rebars for a host of reasons. The principles for design and construction were first established and...
متن کاملDuctility Evaluation of Prestressed Concrete Members
In this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. Influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. Parameters studied include reinforcing index (ω...
متن کاملDebonding-Related Strain Limits for Externally Bonded FRP Sheets in Flexurally Strengthened Reinforced Concrete Beams
Debonding problems of externally bonded fiber reinforced polymer (FRP) sheets in flexurally FRP-strengthened reinforced concrete (RC) beams have been a concern and a research challenge since their application of this strengthening technique. Intermediate crack induced debonding is the most common failure mode which is that the debonding initiates at the critical flexural-shear or flexural crack...
متن کاملDuctility Evaluation of Prestressed Concrete Members
In this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. Influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. Parameters studied include reinforcing index (ω...
متن کامل