Influence of chemical ordering on the thermal conductivity and electronic relaxation in FePt thin films in heat assisted magnetic recording applications
نویسندگان
چکیده
We report on the out-of-plane thermal conductivities of tetragonal L10 FePt (001) easy-axis and cubic A1 FePt thin films via time-domain thermoreflectance over a temperature range from 133 K to 500 K. The out-of-plane thermal conductivity of the chemically ordered L10 phase with alternating Fe and Pt layers is ~23% greater than the thermal conductivity of the disordered A1 phase at room temperature and below. However, as temperature is increased above room temperature, the thermal conductivities of the two phases begin to converge. Molecular dynamics simulations on model FePt structures support our experimental findings and help shed more light into the relative vibrational thermal transport properties of the L10 and A1 phases. Furthermore, unlike the varying temperature trends in the thermal conductivities of the two phases, the electronic scattering rates in the out-of-plane direction of the two phases are similar for the temperature range studied in this work.
منابع مشابه
Experimental estimates of in-plane thermal conductivity in FePt-C granular thin film heat assisted magnetic recording media using a model layered system
Cross-plane thermal conductivity kth measurements of vertical stacks of FePt/C were used to estimate the in-plane thermal conductivity of Heat Assisted Magnetic Recording (HAMR) media that consist of columnar FePt grains segregated by thin C grain boundaries. FePt/C multilayers with varied repeat units and FePt layer thicknesses (chosen to represent HAMR media grain sizes) were measured using F...
متن کاملMagneto-optical spectra of long range chemically ordered FePd(001) alloy films
The occurrence of chemical ordering can have a dramatic influence on structural, electronic, and magnetic properties in many materials systems. Examples of recent interest are binary metallic alloy systems such as CoPt, FePt, and FeAu, where strong interdependencies between magnetic and magneto-optical properties and the degree of long range chemical ordering have been observed. Near the equiat...
متن کاملThermal Analysis of Sintered Silver Nanoparticles Film
Thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. Thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. The defects in material...
متن کاملStudy of Photo-Conductivity in MoS2 Thin Films Grown in Low-Temperature Aqueous Solution Bath
An experimental study over the optical response of thin MoS2 films grownby chemical bath deposition (CBD) method is presented. As two important factors, theeffect of bath temperature and growth time are considered on the photocurrentgeneration in the grown samples. The results show that increasing the growth time leadsto better optical response and higher difference betw...
متن کاملInfluence of Thickness and Number of Silver Layers in the Electrical and Optical Properties of ZnO/Ag/ZnO/Ag/ZnO ultra-Thin Films Deposited on the Glass for Low-Emissivity Applications
We report on transparent ZnO/Ag/ZnO and ZnO/Ag/ZnO/Ag/ZnO thin-films were deposited on the glass substrate by RF and DC sputtering for ZnO and Ag targets, respectively. The electrical and optical properties of the single and double Low Emissivity coatings were investigated with respect to the deposition time of Ag mid layer. The visible transmittance remains about 65% for single and 45% for...
متن کامل