Stochastic deterioration, control and maintenance
نویسنده
چکیده
منابع مشابه
Condition Based Maintenance for Two-Component Systems with Reliability and Cost Considerations
This paper studies a maintenance policy for a system composed of two components, which are subject to continuous deterioration and consequently stochastic failure. The failure of each component results in the failure of the system. The components are inspected periodically and their deterioration degrees are monitored. The components can be maintained using different maintenance actions (repair...
متن کاملIntegrated Inspection Planning and Preventive Maintenance for a Markov Deteriorating System Under Scenario-based Demand Uncertainty
In this paper, a single-product, single-machine system under Markovian deterioration of machine condition and demand uncertainty is studied. The objective is to find the optimal intervals for inspection and preventive maintenance activities in a condition-based maintenance planning with discrete monitoring framework. At first, a stochastic dynamic programming model whose state variable is the ...
متن کاملModelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach
This study aimed at presenting a method for formulating optimal production, repair and replacement policies. The system was based on the production rate of defective parts and machine repairs and then was set up to optimize maintenance activities and related costs. The machine is either repaired or replaced. The machine is changed completely in the replacement process, but the productio...
متن کاملA multi-stage stochastic programming for condition-based maintenance with proportional hazards model
Condition-Based Maintenance (CBM) optimization using Proportional Hazards Model (PHM) is a kind of maintenance optimization problem in which inspections of a system relevant to its failure rate depending on the age and value of covariates are performed in time intervals. The general approach for constructing a CBM based on PHM for a system is to minimize a long run average cost per unit of time...
متن کاملDeterioration and maintenance models for insuring safety of civil infrastructures at lowest life - cycle cost 1
The purpose of the paper is to describe and compare deterioration and maintenance models for civil infrastructures. These models can be applied to determine the best maintenance strategy to insure an adequate level of safety at minimal life-cycle cost while taking the uncertainties in the deterioration process into account. Without being complete, a time-dependent deterioration process can be m...
متن کامل