A Hardware Platform for Implementing Control Designs on the Quanser DC Motor Control Trainer
نویسنده
چکیده
The paper describes hardware implementation of control system designs using the Quanser DC Motor Control Trainer (DCMCT). Toward this goal, students are guided to design control systems and verify their designs via simulation environments like MATLAB/Simulink. Then, they realize the control system designs by building op-amp circuits and validate the designs via the Quanser DC Motor Control Trainer. Through implementing the designed control systems in circuits, students learn how to physically design and implement a feedback control system.
منابع مشابه
A Novel High-Performance Field-Weakening Control for Axial Flux-Switching Permanent-Magnet Motor
By combining the field-weakening control principle of a new axial flux-switching permanent-magnet motor (AFFSSPM) with the space vector pulse width modulation (SVPWM) and maximum torque per voltage (MTPV) control principle, a novel field-weakening control strategy for AFFSSPM is proposed in this paper. In the first stage of the field-weakening, the difference between the reference voltage updat...
متن کاملNonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System
This paper proposes a stand-alone photovoltaic (PV) system based on a DC-DC positive output super lift Luo (POSLL) converter. A conventional sliding mode control, a sliding mode controller using a simple sign function and a linear controller using proportional integrator (PI) are used for the control of the PV panel voltage and POSLL converter inductor current and these methods are compared tog...
متن کاملHardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources
In this paper, a hardware in the loop simulation (HIL) is presented. This application is purposed as the first step before a real implementation of a Generalized Predictive Control (GPC) on a micro-grid system located at the Military University Campus in Cajica, Colombia. The designed GPC, looks for keep the battery bank State of Charge (SOC) over the 70% and under the 90%, what ensures the bes...
متن کاملLqg/ltr Controller Design for Rotary Inverted Pendulum Quanser Real-time Experiment
This experiment consists of a rigid link (pendulum) rotating in a vertical plane. The rigid link is attached to a pivot arm, which is mounted on the load shaft of a DC-motor. The pivot arm can be rotated in the horizontal plane by the DC-motor. The DC-motor is instrumented with a potentiometer. In addition, a potentiometer is mounted on the pivot arm to measure the pendulum angle. The principal...
متن کاملAnalysis of Speed Control in DC Motor Drive Based on Model Reference Adaptive Control
This paper presents fuzzy and conventional performance of model reference adaptive control(MRAC) to control a DC drive. The aims of this work are achieving better match of motor speed with reference speed, decrease of noises under load changes and disturbances, and increase of system stability. The operation of nonadaptive control and the model reference of fuzzy and conventional adaptive contr...
متن کامل