Testing analog and mixed-signal integrated circuits using oscillation-test method

A new low-cost test method for analog integrated circuits, called the oscillation test, is presented. During the test mode, the circuit under test (CUT) is converted to a circuit that oscillates. Faults in the CUT which deviate the oscillation frequency from its tolerance band can be detected. Using this test method, no test vector is required to be applied. Therefore, the test vector generation problem is eliminated, and the test time is very small because only a single output frequency is evaluated for each CUT. The oscillation frequency may be considered as a digital signal and therefore can be evaluated using pure digital circuitry. These characteristics imply that the oscillation-test strategy is very attractive for wafer-probe testing as well as final production testing. In this note, the validity of the proposed test method has been verified throughout various examples such as operational amplifiers, amplifiers, filters, and analog-todigital converters (ADC’s). The simulations and practical implementation results affirm that the presented method assures a high fault coverage.