A comparative study of the LBE and GKS methods for 2D near incompressible laminar flows

نویسندگان

  • Zhaoli Guo
  • Hongwei Liu
  • Li-Shi Luo
  • Kun Xu
چکیده

We compare the lattice Boltzmann equation (LBE) and the gas-kinetic scheme (GKS) applied to 2D incompressible laminar flows. Although both methods are derived from the Boltzmann equation thus share a common kinetic origin, numerically they are rather different. The LBE is a finite difference method, while the GKS is a finite-volume one. In addition, the LBE is valid for near incompressible flows with low-Mach number restriction Ma < 0.3, while the GKS is valid for fully compressible flows. In this study, we use the generalized lattice Boltzmann equation (GLBE) with multiple-relaxation-time (MRT) collision model, which overcomes all the apparent defects in the popular lattice BGK equation. We use both the LBE and GKS methods to simulate the flow past a square block symmetrically placed in a 2D channel with the Reynolds number Re between 10 and 300. The LBE and GKS results are validated against the well-resolved results obtained using finite-volume method. Our results show that both the LBE and GKS yield quantitatively similar results for laminar flow simulations, and agree well with existing ones, provided that sufficient grid resolution is given. For 2D problems, the LBE is about 10 and 3 times faster than the GKS for steady and unsteady flow calculations, respectively, while the GKS uses less memory. We also observe that the GKS method is much more robust and stable for underresolved cases due to its upwinding nature and interpolations used in calculating fluxes. 2008 Elsevier Inc. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Lattice Boltzmann simulations of 2D laminar flows past two tandem cylinders

We apply the lattice Boltzmann equation (LBE) with multiple-relaxation-time (MRT) collision model to simulate laminar flows in two-dimensions (2D). In order to simulate flows in an unbounded domain with the LBE method, we need to address two issues: stretched nonuniform mesh and inflow and outflow boundary conditions. We use the interpolated grid stretching method to address the need of non-uni...

متن کامل

Incompressible laminar flow computations by an upwind least-squares meshless method

In this paper, the laminar incompressible flow equations are solved by an upwind least-squares meshless method. Due to the difficulties in generating quality meshes, particularly in complex geometries, a meshless method is increasingly used as a new numerical tool. The meshless methods only use clouds of nodes to influence the domain of every node. Thus, they do not require the nodes to be conn...

متن کامل

Development length of laminar magnetohydrodynamics pipe flows

In this article, a laminar magnetohydrodynamics (MHD) developing flow of an incompressible electrically conducting fluid subjected to an external magnetic field is considered. The aim of the study is to propose a correlation for computing the development length of the laminar MHD developing flow in a pipe. A numerical approach is considered to solve the problem. In the first step, the numerical...

متن کامل

Implementation of D3Q19 Lattice Boltzmann Method with a Curved Wall Boundary Condition for Simulation of Practical Flow Problems

In this paper, implementation of an extended form of a no-slip wall boundary condition is presented for the three-dimensional (3-D) lattice Boltzmann method (LBM) for solving the incompressible fluid flows with complex geometries. The boundary condition is based on the off-lattice scheme with a polynomial interpolation which is used to reconstruct the curved or irregular wall boundary on the ne...

متن کامل

A lattice Boltzmann algorithm for calculation of the laminar jet diffusion flame

A new two-distribution lattice Boltzmann equation (LBE) algorithm is presented to solve the laminar diffusion flames within the context of Burke–Schumann flame sheet model. One distribution models the transport of the Schvab–Zeldovich coupling function, or the mixture fraction to combine the energy and species equations. The other distribution models the quasi-incompressible Navier–Stokes equat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • J. Comput. Physics

دوره 227  شماره 

صفحات  -

تاریخ انتشار 2008