High-speed data capturing components for Super Resolution Maximum Length Binary Sequence UWB Radar

Within framework of UKoLoS project the new Super Resolution Maximum Length Binary Sequence UWB Radar (M-sequence radar) was developed. The radar consists of an M-sequence generator, transmitter front-end, receiver front-end, data capturing device and data processing blocks, whose design responsibilities were carried out by four institutions. In this thesis the design and measurements of the data capturing device components is described. Logically the data capturing device can be divided into three parts; a capturing part, realized with the high-speed analog-to-digital converter, a predictor, realized with the high-speed digital-to-analog converter and a subtraction amplifier, which in this particular work is integrated into the receiver front-end. The main challenge of the work is to implement the A/D converter, which works at full speed of the radar. Despite the radar architecture allows capturing data with undersampling, it leads to waste of transmitted energy. Therefore the ADC has to capture reflected signal with the full system clock rate of 10 GHz and should have a full Nyquist 5 GHz effective resolution bandwidth. Implementation of the conventional 4-bit full flash ADC with specified bandwidth is not possible in the IHP SiGe BiCMOS technology because some critical blocks, namely the reference network, can not achieve 5 GHz effective resolution bandwidth. To overcome this problem a new configuration of the differential reference network is proposed. The new reference network has a segmented, free configurable