Multi-Axis Inertial Energy Harvester Based on Piezoelectric Crab-Legs with Partitioned Electrodes
نویسندگان
چکیده
This paper reports a microfabricated piezoelectric MEMS inertial energy harvester that can scavenge high-frequency mechanical vibrations in all three dimensions with an active inner volume of only 55 mm. The device can generate 0.1 to 10.5 μW from out-of-plane vibrations (365-465 Hz), and 0.1 to 3.2 μW from in-plane vibrations (680-930 Hz) at 0.5 g acceleration input. The reported harvester is demonstrated to be effective for multi-axis operation, with a favorable power density of 0.2-2.2 mW/cm/g (at 0.1-0.5 g) with respect to previously reported microfabricated multi-axis vibration harvesters.
منابع مشابه
Autonomous Wireless Heat Energy Meter based on Piezoelectric Energy Harvester for Heat Energy Measurement in Building Complexes
This paper presents a platform for power autonomous wireless energy meter device using piezoelectric energy harvesters. This device can be mainly used for measuring the share of heat energy consumption in a fair manner in building complex with central heat energy system. In the suggested device, the piezoelectric energy harvester is also used as a flow-meter to reduce the power consumption of t...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملWideband Piezoelectric Energy Harvester Tuned Through its Electronic Interface Circuit
This paper reports a novel technique enabling to tune the resonant frequency of linear inertial piezoelectric energy harvesters through the control strategy of the associated electronic interface circuit. When associated with piezoelectric devices exhibiting high electromechanical coupling, it is expected to enable the variation of the resonant frequency in large proportions.
متن کاملConception of an Interdigitated Electrodes Based Cantilever for Piezoelectric Energy Harvesting
This paper reports on conception, simulation, and fabrication of a lead zirconate titanate (PZT) MEMS cantilevers for piezoelectric energy harvesting (EH). We investigate the advantages of interdigitated electrode configurations (IDE) with respect to parallel-plate electrodes (PPE) in terms of output voltage and output power from the constitutive equations of piezoelectricity. Finite element mo...
متن کامل