Decoupled Control of Active and Reactive Power for a Grid-connected Doubly-fed Wound Rotor Induction Machine without Position Sensors
نویسنده
چکیده
Abstruct In this paper field-oriented control of a doubly-fed wound rotor induction machine without shaft position sensors is presented. The stator is directly connected to the constant frequency three phase grid and the rotor currents are appropriately controlled to vary the slip power thereby enabling variable speed constant frequency operation. Instead of using dynamic angle controllers for rotor position estimation, a direct method based on simple transformations is proposed. The control algorithms are implemented on a DSP-based hardware platform and tested on a laboratory motor-generator set. Details of. the algorithms, implementation, and relevant experimental results are presented.
منابع مشابه
A Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملSliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کاملModel Predictive Control of a BCDFIG With Active and Reactive Power Control Capability for Grid-Connected Applications
Recently, Brushless Cascaded Doubly Fed Induction Generator (BCDFIG) has been considered as an attractive choice for grid-connected applications due to its high controllability and reliability. In this paper, a Finite Control Set Model Predictive Control (FCS-MPC) method with active and reactive power control capability in grid-connected mode is proposed for controlling the BCDFIG in a way that...
متن کاملNovel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant
Hydropower plant and especially micro-hydropower plant is an available, reliable and economical energy source. Micro-hydropower plant is one of the most environment-friendly technology, use and development of which leads to reduction of energy consumption sporadically and worldwide. Along with the growth of these power plants, the issues related to the control of electrical parameters such ...
متن کاملNovel design and simulation of predictive power controller for a doubly-fed induction generator using rotor current in a micro-hydropower plant
Hydropower plant and especially micro-hydropower plant is an available, reliable and economical energy source. Micro-hydropower plant is one of the most environment-friendly technology, use and development of which leads to reduction of energy consumption sporadically and worldwide. Along with the growth of these power plants, the issues related to the control of electrical parameters such ...
متن کامل