First Tests with a Local and Integral Magnetic Field Measurement Setup for Conduction Cooled Superconducting Undulator Coils
نویسندگان
چکیده
During the last years improvements in magnetic field measurement technology of conventional, i.e. permanent magnet based insertion devices (IDs), made significant progress and pushed the capabilities of synchrotron light sources. For superconducting IDs similar developments are now needed to perform precise measurements of local magnetic fields and field integrals. We follow this aim within our R&D program for superconducting IDs. This contribution describes challenges of the design and measurement setup to perform magnetic measurements of the local field and of the field integrals of superconducting undulator coils in a cold, in-vacuum (cryogen free) environment together with results of first tests.
منابع مشابه
In-vacuum, Cryogen-free Field Measurement System for Superconducting Undulator Coils
The performance of superconducting insertion devices (IDs) depends strongly on the magnetic field quality. Before installing IDs in synchrotron light sources the characterization and precise measurements of their magnetic properties are of fundamental importance. Improvements in magnetic field measurement technology of conventional, i.e. permanent magnet based IDs, made significant progress dur...
متن کاملField quality of 1.5 m long conduction cooled superconducting undulator coils with 20 mm period length
The Institute for Beam Physics and Technology (IBPT) at the Karlsruhe Institute of Technology (KIT) and the industrial partner Babcock Noell GmbH (BNG) are collaborating since 2007 on the development of superconducting undulators both for ANKA and low emittance light sources. The first full length device with 15 mm period length has been successfully tested in the ANKA storage ring for one year...
متن کاملFirst Characterization of a Superconducting Undulator Mockup with the Casper Ii Magnetic Measurement System
Superconducting insertion devices (IDs) can reach, for the same gap and period length a higher field strength compared to permanent magnet IDs. Their performance depends strongly on the magnetic field quality. While the magnetic measurements technology of permanent magnet based IDs made significant progress during the last years, for superconducting IDs similar major developments are necessary....
متن کاملTRAINING AND CHARACTERIZATION OF 1.5 m LONG CONDUCTION COOLED SUPERCONDUCTING UNDULATOR COILS WITH 20 mm PERIOD LENGTH
The Institute for Beam Physics and Technology (IBPT) of the Karlsruhe Institute of Technology (KIT), and Babcock Noell GmbH (BNG) are collaborating since several years on an R&D program on superconducting undulators (SCUs). At the moment the collaboration is focusing on a SCU with 20 mm period length (SCU20) for ANKA, the test facility and synchrotron radiation source, run by the IBPT. The 1.5 ...
متن کاملThree-dimensional calculations of the magnetic fields in a finite superconducting hollow cylinder in an applied axial magnetic field
In this study, a set of self-consistent coupled-integral equations for the local magnetic flux and current distributions in a finite superconducting hollow cylinder under an axial magnetic field has been directly derived by using the Biot-Savart law within the framework of the critical-state model. The equations were first solved numerically in the three-dimensional space before obtaining the h...
متن کامل