Pii: S1359-6462(01)00936-8
نویسندگان
چکیده
By appropriate annealing of rapidly quenched NddFe13.1B (2.05,d,147.6) the amount and microstructure of the Nd2Fe14B grains in the Nd-rich matrix were systematically controlled and correlated with coercivity, m0Hc. For optimally annealed NddFe13.1B an increase in Nd concentration enhances m0Hc of the Nd2Fe14B grains (from 1.2 T in Nd2.05Fe13.1B to 2.75 T in Nd147.6Fe13.1B at 290 K) and promotes the growth of the Nd2Fe14B grains elongated in shape. The largest observed coercivity, Hc ; 2.75 T is over 80% of the theoretical limit expected for Stoner-Wohlfarth coherent rotation behavior including demagnetization effects. © 2001 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
منابع مشابه
Pii: S1359-6462(00)00465-6
To determine flow curves of a material, whose plastic deformation is produced by martensitic transformation, transformation strains of a martensite plate must be characterized [1–3]. Most studies along this line adopt results obtained by the phenomenological crystallographic theory of martensitic transformation [4,5]. The theory is based on finite deformation analysis, which needs involved comp...
متن کاملPii: S1359-6462(99)00347-4
The TiNiHf alloys are newly developed as high temperature shape memory alloys with the high transformation temperatures and with lower cost in comparison with TiNiX (X 5 Pd, Pt) alloys. Recently a lot of investigations were focused on the TiNiHf alloys, in which Hf contents are ranged from 1% to 30% [1–8]. Zhu et al. [9] proposed that the decrease of the transformation temperatures of the Ti51....
متن کاملPii: S1359-6462(99)00345-0
In a recent paper, Li and Wawner [1] reported results of a study of the interaction between dislocations and {111}a precipitate plates of V (Al2Cu) phase in a plastically deformed Al-Cu-Mg-Ag alloy using both conventional and high resolution transmission electron microscopy (HRTEM). Based on experimental observations that V phase was sheared in plastically-deformed samples, they propose a stren...
متن کاملNano-indentation of Copper Thin Films on Silicon Substrates
Indentation methods are finding increasing use in the study of mechanical properties of bulk and thin-film materials over a wide range of size scales (e.g., [1,2]). With the increasing sophistication of instrumented, depth-sensing indentation equipment and of computational methods to model the deformation of materials subjected to indentation, there is growing interest in studying the elastopla...
متن کاملPii: S1359-6462(00)00548-0
Al foams have found increasing applications in a wide range of structural and functional products, due to their exceptional mechanical, thermal, acoustic, electrical and chemical properties [1–3]. Al foam structures have densities only fractions of that of a solid structure and therefore have high specific strength and stiffness. They also have excellent properties for impact energy, vibration ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001