Mathematical model and regression analysis of acoustic emission signals generated by partial discharges

نویسنده

  • Daria Wotzka
چکیده

An improved mathematical model describing acoustic emission (AE) signals generated by different types of partial discharges (PD) that occur in electric power transformer insulation system is presented in the paper. AE signals are analyzed within the AE method as applied for power transformer failure detection due to occurrence of PD. There are several types of basic defects, which are characterized by different types of PD. The mathematical model presented here is crucial for numerical analyses and simulations, where it acts as the function describing the acoustic source in an acoustic model of power transformer insulation system. The regression procedure was performed based on empirical AE signals, registered in a laboratory experiment. The AE signals are described by a mathematical model being a multi-parameter function, which involve both the time domain and the frequency domain. Goodness of the model was evaluated based on analysis of 480 data samples in the time, frequency and time-frequency domains. Also coherence between the registered and modeled signals was calculated. It was stated that the improved model fits very well to the real data, although, due to high level of noise embodied in signals registered in experiments, the coherence values remain low. Moreover, analyses of the estimated data were performed and some example results are presented in this paper. Based on the achieved outcomes a collection of parameter values was prepared for each of the eight considered PD basic types. One can simple use it now in a numerical model for simulation of AE signal source generated by specified type of PD, what corresponds to a particular power transformer insulation system failure. Furthermore, the regression procedure presented in this paper can be easily transferred to any other types of AE sources including processes of compression, tension and cracking.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of the Oil Layer Thickness on Suppression of Higher Frequencies of the Acoustic Emission Signals Generated by Partial Discharges

The subject matter of this paper refers to the assessment of the influence of the oil layer thickness on suppression of the acoustic emission (AE) signals generated by partial discharges (PDs) developing in paper-oil insulation of power appliances. The paper presents laboratory research results referring to the analysis of suppression of the AE signals frequency band depending on the thickness ...

متن کامل

Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)

Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...

متن کامل

Classification of Acoustic Emission Based Partial Discharge in Oil Pressboard Insulation System Using Wavelet Analysis

Insulation used in transformer is mostly oil pressboard insulation. Insulation failure is one of the major causes of catastrophic failure of transformers. It is established that partial discharges (PD) cause insulation degradation and premature failure of insulation. Online monitoring of PDs can reduce the risk of catastrophic failure of transformers. There are different techniques of partial d...

متن کامل

Application of the Short Time Fourier Transform in Evaluation of the Acoustic Emission Signals Generated by Partial Discharges

The subject matter presented in this paper deals with application of the short time Fourier transform (STFT) in processing the acoustic emission (AE) pulses generated by six basic forms of partial discharges (PDs) that can occur in insulation systems of power appliances. The paper presents the time-frequency analysis results of the AE pulses generated by the following spark gaps modeling the fo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014