Fabrication and Characterization of Layer by Layer Assembled Single and Dual- Electrochrome Electrochromic Devices

نویسندگان

  • Reza Montazami
  • James R. Heflin
  • Donald Leo
  • Abby W. Morgan
چکیده

This thesis presents applications of the layer-by-layer (LbL) assembly technique in fabrication of thin films with a primary focus on design and development of electrochromic devices. The optical properties of electrochromic materials change as they alter between redox states. The morphology and properties of LbL-assembled thin films can be modified by varying several processing factors such as dipping duration, ion type, ion concentration, pH, molecular weight, and ionic strength. In the present work, several factors of LbL assembly process were manipulated to tailor electrochromic thin films of desired attributes. An electrochromic device (ECD) with fast optical switching speed was designed and constructed based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). This device exhibited optical switching speeds of 31 and 6 ms for coloration and decoloration respectively, on a 60 mm 2 area. Poly(aniline 2-sulfonic acid) (PASA) is a relatively new ionic polymer, and its electrochromic properties have not been previously investigated in much detail. PASA thin film showed several redox states corresponding to color changes from dark blue to gray as it passed different redox states. One particularly interesting and promising design for ECDs is dual electrochrome. Dual electrochrome ECDs based on PANI and polyaniline (PASA) are investigated in this thesis. The PANI/PASA thin film showed superior spectroelectrochemical properties compare to other ECDs reported here or elsewhere. An electrode with single wall carbon nanotubes (SWCNTs) coating was tested as the substrate for an ECD based on poly[2-(3-thienyl) ethoxy-4-butylsulfonate] (PTEBS) to examine performance of the electrochromic polymer on a substrate other than an indium tin oxide (ITO) electrode. Compared to ITO, the SWCNT based device exhibited superior properties.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Designing and Fabrication of Electrochromic Windows Using Tungsten Oxide Films Prepared Through Sol-gel Coating on a Glass

In this study, a sol-gel peroxotungstic acid sol was employed to deposit tungsten oxide (WO3) films by the spin-coating technique. In view of smart window applications, electrochromic windows were then designed and fabricated using a thin tungsten oxide film. For this purpose, Glass/ FTO/ WO3/ electrolyte/ FTO/Glass could be of use due to its special structure that consists of an electrochromic...

متن کامل

Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating

In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...

متن کامل

Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE)

This study is focused on fabrication and characterization of mixed matrix poly ether sulfone based nanofiltration membrane by phase inversion method. The effect of different amounts of Ilmenite (FeTiO3) particles as inorganic filler additive in the casting solution on physic-chemical characteristics of membranes was studied. Scanning electron microscopy, surface analysis, water content, contact...

متن کامل

مقایسه کارایی صافی یک لایه با بستر ماسه و صافی دو لایه با بسترهای لیکا و آنتراسیت در حذف مواد آلی و کدورت

Backgrounds and Objectives: Improvement of water quality standards and inability of mono layer filters in producing such quality caused researchers attended to multi layer filters. Due to specific characteristics of anthracite and leca can improve removal of organic materials and Surface over flow rate. The aim of this research was evaluation performance of dual media filters (anthracite/leca) ...

متن کامل

Fabrication and Characterization of a New MEMS Capacitive Microphone using Perforated Diaphragm

In this paper, a novel single-chip MEMS capacitive microphone is presented. The novelties of this method relies on the moveable aluminum (Al) diaphragm positioned over the backplate electrode, where the diaphragm includes a plurality of holes to allow the air in the gap between the electrode and diaphragm to escape and thus reduce acoustical damping in the microphone. Spin-on-glass (SOG) was us...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010