Optical Properties of Composite Materials at High Temperatures
نویسندگان
چکیده
The optical properties of composite materials are studied theoretically as a function of temperature via a phenomenological model for temperatures up to the melting points of the materials. Both the Maxwell-Garnett and Bruggeman models are considered and the temperature variation of the optical constants of the metallic particles is obtained with an account of the dependence of both the electron-phonon and electron-electron scattering on temperature. The results show that the extinction coefficient of the composite generally increases with temperature and that the Maxwell-Garnett and Bruggeman models can give very different results at certain optical frequency. Transmittance through a thin composite film is calculated providing a means for a simple experimental study of the various modeling results. Copyright
منابع مشابه
INVESTIGATION OFELECTRICALAND MECHANICALPROPERTIES OFTETRAGONAL/CUBIC COMPOSITE ELECTROLYTES PREPARED BYIMPREGNATION OFCUBIC ZIRCONIAWITH ZIRCONIASOLUTION
Abstract: Zirconia solid electrolytes with nonequilibrium composite structure were prepared by impregnation of a porous 8YSZ matrix with a solution of Zirconia. Microstructures were characterized by XRD and SEM. The electrical properties were studied by impedance spectroscopy as a function of temperature. Biaxial flexural strength and fracture toughness of composite samples were measured by rin...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملA Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment
In this article, microstructural characteristics and mechanical properties of Al-Si-Cu/NCP composites were evaluated. Reinforced nanocomposites with 1 wt% nano-clay were fabricated by the method of the stir casting. Stirring times and temperatures were variable parameters to produce specimens. Consequently, the effect of a T6 heat treatment, which contained solutioning at 490 ºC for ...
متن کاملProduction and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique
Automotive and aerospace industries are required to light materials which have high properties. This causes to reduce production cost and fuel consumption. One of these advanced materials that have been attracted at these decades is particulate metal matrix nanocomposites. These materials have a combination of ductile matrix alloy properties and ceramic reinforcement nanoparticles. Powder metal...
متن کامل