Investigating Wastewater Treatment in MBRs Using Computational Fluid Dynamics

نویسندگان

  • Mitra Bayat
  • Mohammad Reza Mehrnia
  • Navid Mostoufi
  • Mehdi Rajabi Hamaneh
چکیده

1. Master Student of Chemical Engineering, Chemical Engineering Department, College of Engineering, University of Tehran, Iran ([email protected]) 2. Associate Professor, Chemical Engineering Department, College of Engineering, University of Tehran, Iran 3. Professor, , Chemical Engineering Department, College of Engineering, University of Tehran, Iran ([email protected]) 4. Assistant Professor, Chemical Engineering Department, College of Engineering, University of Tehran, Iran ([email protected])

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Membrane Bioreactors in the Treatment of Wastewater Generated from Agricultural Industries and Activities

Membrane Bioreactors (MBRs) can be broadly defined as systems integrating biological degradation of waste products with membrane filtration. They have proven quite effective in removing organic and inorganic contaminants as well as biological entities from wastewater. Advantages of the MBR include good control of biological activity, high quality effluent free of bacteria and pathogens, smaller...

متن کامل

Computational Fluid Dynamics Simulation and Experimental Validation of Hydraulic Performance of a Vertical Suspended API Pump (RESEARCH NOTE)

For a long period of time, design and manufacturing technology of high flow rated vertically suspended pumps (VSPs) which have an extensive applications in many industries such as water and wastewater, mining, petrochemical and oil and gas industries, used to be imported from European countries. For the first time in Iran's pump industry, with the support of Ministry of Petrochemical[ah1]  and ...

متن کامل

Investigation of stepped planning hull hydrodynamics using computational fluid dynamics and response surface method

The use of step at the bottom of the hull is one of the effective factors in reducing the resistance and increasing the stability of the Planning hull. The presence of step at the bottom of this type of hulls creates a separation in the flow, which reduces the wet surface on the hull, thus reducing the drag on the body, as well as reducing the dynamic trim. In this study, a design space was cre...

متن کامل

Multiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics

Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015