Nanoindentation of wood cell walls: Continuous stiffness and hardness measurements

The objective of this study was to measure the mechanical properties of individual, native wood fibers using the continuous nanoindentation measurement technique. The indentation depth profile exhibited a small length-scale effect, which was confirmed using the size-effect index derived from the indentation loading curve. The hardness (Hu) or stiffness (Eu) values determined from indentation unloading were also examined for 10 different annual rings of a loblolly pine, with microfibril angles (MFA) between 14 and 36 . A predictable pattern of Eu values was found as a function of MFA, and hence Eu can at least be considered a relative measure of the longitudinal stiffness properties of wood cell walls. For Hu values, a dependence on orientation was observed, and there is a preliminary indication that the dependence could be affected by cell-wall extractives. It is thus desirable, for cell-wall modification studies, to minimize any unintended variations by using samples that are from the same growth ring, so that any treatment-induced changes in the cellwall hardness can be identified. 2006 Elsevier Ltd. All rights reserved.