Solder Creep-Fatigue Model Parameters for SAC & SnAg Lead-Free Solder Joint Reliability Estimation
نویسندگان
چکیده
For many of the Pb-free solders required under the European RoHS directive, there is now sufficient information, primarily in the form of the results of accelerated thermal cycling of various levels of severity, to develop acceleration models for the creep-fatigue of these solders. In this paper the parameters for the SAC405/305, SAC205, SAC105 and SnAg to replace the parameters for eutectic SnPb in the well-established Engelmaier-Wild solder creep-fatigue model.
منابع مشابه
Constitutive Property Testing and Reliability Assessment of Lead - Free Solder Joint
Title of Document: CONSTITUTIVE PROPERTY TESTING AND RELIABILITY ASSESSMENT OF LEADFREE SOLDER JOINT Yuri Lee, Master, 2010 Directed By: Professor Bongtae Han, Department of Mechanical Engineering A modified single lap shear test configuration, based on the Iosipescu geometry, is proposed to characterize mechanical properties of solder alloys. In the method, an auxiliary device (extension unit)...
متن کاملAnalysis of Solder Joint Reliability in Flip Chip Packages
Fatigue damage of solder joints is a serious reliability concern in electronic packaging. In this study, a flip chip package was modeled to investigate the effects of underfill material properties and BT substrate thickness on solder joint reliability. The CTE was found to have the main effect and matching CTE between underfill and solder joint is the most important consideration in the selecti...
متن کاملSolder Joint Creep and Stress Relaxation Dependence on Construction and Environmental-stress Parameters
Creep strain is probably the most important time-dependent damage accrual factor affecting solder joint reliability. Under typical multi-hour loading conditions, creep-induced strain is a complex time per cycle, the system. function of solder metallurgical structure, solder temperature, loading applied stress, and the spring constant of the combined part/lead/board The complex system level cree...
متن کاملA Parametric Study of Flip Chip Reliability Based on Solder Fatigue Modelling: Part II - Flip Chip on Organic
A solder fatigue model for the 63Sn/Pb solder alloy has been previously introduced which characterizes the creep fatigue phenomena of the solder by combining nonlinear finite element modelling with experimental thermal fatigue lives of various flip chip assemblies. The model correlates the amount of creep strain energy dissipated per thermal cycle with the characteristic Weibull life of the cri...
متن کاملSolder Creep - Fatigue Interactions With Flexible Leaded Parts
With flexible leaded parts, the solder-joint failure process involves a complex interplay of creep and fatigue mechanisms. To better understand the role of creep in typical multi-hour cyclic loading conditions, a specialized non-linear finite-element creep simulation computer program has been formulated. The numerical algorithm includes the complete part-lead-solder-P WB system, accounting for ...
متن کامل