Low Power Efficient D Flip Flop Circuit
نویسندگان
چکیده
This paper enumerates low power, high speed design of D flip-flop. It presents various techniques to minimize subthershold leakage power as well as the power consumption of the
منابع مشابه
Performance Analysis of Reversible Sequential Circuits Based on Carbon NanoTube Field Effect Transistors (CNTFETs)
This study presents the importance of reversible logic in designing of high performance and low power consumption digital circuits. In our research, the various forms of sequential reversible circuits such as D, T, SR and JK flip-flops are investigated based on carbon nanotube field-effect transistors. All reversible flip-flops are simulated in two voltages, 0.3 and 0.5 Volt. Our results show t...
متن کاملTwo Novel D-Flip Flops with Level Triggered Reset in Quantum Dot Cellular Automata Technology
Quantum dot cellular automata (QCA) introduces a pioneer technology in nano scale computer architectures. Employing this technology is one of the solutions to decrease the size of circuits and reducing power dissipation. In this paper, two new optimized FlipFlops with reset input are proposed in quantum dot cellular automata technology. In addition, comparison with related works is performed.Th...
متن کاملDesigning a Novel Power Efficient D- Flip-Flop using Forced Stack Technique
In Integrated circuits a gargantuan portion of on chip power is expended by clocking systems, which comprises of timing elements such as flip-flops, latches and clock distribution network. These elements absorb approximately 30% to 60% of the total power dissipation in the system. In order to design high performance and power efficient circuits a scrupulous approach should be adopted to reduce ...
متن کاملA new low power high reliability flip-flop robust against process variations
Low scaling technology makes a significant reduction in dimension and supply voltage, and lead to new challenges about power consumption such as increasing nodes sensitivity over radiation-induced soft errors in VLSI circuits. In this area, different design methods have been proposed to low power flip-flops and various research studies have been done to reach a suitable hardened flip-flops. In ...
متن کاملIntroducing New Structures for D-Type Latch and Flip-Flop in Quantum-Dot Cellular Automata Technology and its Use in Phase-Frequency Detector, Frequency Divider and Counter Circuits
Quantum-dot cellular automata (QCA) technology is an alternative to overcoming the constraints of CMOS technology. In this paper, a new structure for D-type latch is presented in QCA technology with set and reset terminals. The proposed structure, despite having the set and reset terminals, has only 35 quantum cells, a delay equal to half a cycle of clocks and an occupied area of 39204 nm2. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011