Laser Energy Effects on Optical Properties of Titanium Di-Oxide Prepared by Reactive Pulsed Laser Deposition
نویسنده
چکیده
In this Work, Laser energy effects on optical and morphological properties of TiO2 thin film has been carried out using Reactive Pulsed Laser as a Deposition technique (RPLD). Q-switched Nd-YAG laser with (λ=1.06μm, t =7nsec) and different energies have been used to ablate pure Titanium target and deposited thin films on glass substrates with constant substrate temperature of (343K). The optical properties of the films prepared include Optical transmit ion and absorption measurement, surface uniformity measurement and FTIR structure of these films. The results films show that high transparency reached to about (85-98) % can be achieved with TiO2 film which itself decreases sharply with the increasing of Laser energy while the optical band gap is (3.7-3.9) eV at optimum Laser energy in all results (800mJ), the FTIRstructure result at 800 mJ is the optimum and peaks absorption of TiO2 are (408.91, 439.77, 524.64) cm.
منابع مشابه
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique
Titanium and titanium alloys are often used in orthopedic surgery and dentistry because of their especial characteristics such as biocompatibility, mechanical properties, and corrosion resistance. However, their bio- inertness is the most serious drawback for biomedical applications. Therefore, a bioactive coating like hydroxyapatite (HA) is coated on their surface. In this regard, in the prese...
متن کاملOptical Properties of Nitrogen-Substituted Strontium Titanate Thin Films Prepared by Pulsed Laser Deposition
Perovskite-type N-substituted SrTiO3 thin films with a preferential (001) orientation were grown by pulsed laser deposition on (001)-oriented MgO and LaAlO3 substrates. Application of N2 or ammonia using a synchronized reactive gas pulse produces SrTiO3-x:Nx films with a nitrogen content of up to 4.1 at.% if prepared with the NH3 gas pulse at a substrate temperature of 720 °C. Incorporating nit...
متن کاملGrowth, Characterization of Cu Nanoparticles Thin Film by Nd: YAG Laser Pulses Deposition
We report the growth and characterization of Cu nanoparticles thin film of on glass substrate by pulse laser deposition method. The Cu thin film prepared with different energy 50, 60, 70, and 80 mJ. The energy effect on the morphological, structural and optical properties were studied by AFM, XRD and UV-Visible spectrophotometer. Surface topography studied by atomic force microscopy revealed na...
متن کاملUltraviolet laser crystallized ZnO:Al films on sapphire with high Hall mobility for simultaneous enhancement of conductivity and transparency
Articles you may be interested in Room temperature deposition of alumina-doped zinc oxide on flexible substrates by direct pulsed laser recrystallization Appl. Optical and electrical properties of transparent conducting B-doped ZnO thin films prepared by various deposition methodsa) Structural, electrical, and optical properties of transparent conductive oxide ZnO:Al films prepared by dc magnet...
متن کاملCurrent-modulated optical properties of vanadium dioxide thin films in the phase transition region
Articles you may be interested in Optical switching and photoluminescence in erbium-implanted vanadium dioxide thin films Effect of oxygen stoichiometry on the insulator-metal phase transition in vanadium oxide thin films studied using optical pump-terahertz probe spectroscopy Appl. Tuning the properties of VO2 thin films through growth temperature for infrared and terahertz modulation applicat...
متن کامل