Syntactic foams consolidated with starch: modelling for pre-mould processing
نویسندگان
چکیده
Abstract. Various manufacturing parameters involved in ‘buoyancy method’ were inter-related. An equation based on unit cell models for a relation between volume expansion ratio (VER) of bulk microspheres in aqueous starch and microsphere size was derived. A good agreement between the equation and experimental data was found. The inter-microsphere distance (MID) concept was introduced and it was demonstrated that the MID can be calculated numerically for microspheres with known statistical data.
منابع مشابه
Syntactic foams consolidated with starch: mixing behaviour for post- mould processing
The mixing required for post-mould gelatinisation of syntactic foams using starch as binder was studied. It was found that starch particles tend to adhere to hollow microspheres during mixing, forming agglomerates. A transition in the buoyancy of microsphere-starch phases was found at a particular volume fraction of starch. The transitional point was close to a volume fraction of starch at whic...
متن کاملNovel syntactic foams made of ceramic hollow micro-spheres and starch – theory, structure and properties
Novel syntactic foams made of starch and ceramic hollow micro-spheres were developed. Foams of four different micro-sphere size groups were manufactured with either preor post-mould gelatinisation process. Compressive failure behaviour and mechanical properties were evaluated. Not much difference in failure behaviour or in mechanical properties between the two processes (preand post-mould gel) ...
متن کاملبررسی عوامل حبابزای TiH2و CaCO3 بر ساختار وخواص کامپوزیت فومی Al-7%Si-3%SiC
In this paper, the effect of TiH2 and CaCO3 blowing agents was investigated on the structure and energy absorption of Al-7%Si-3%SiC composite metal foam by powder compact route. Composition of the foam was prepared from a mixture of Al, SiC and Si powders. Then, precursors were consolidated in H13 die mould by cold and uni-axial pressing at 110 MPa and at room temperature. The pressed precursor...
متن کاملStabilisation of Wet Protein Foams Using Starch Nano-Particles
Protein isolate is used in the food industry in order to process and stabilise food foams. Thereforethere has been a great deal of interest and research in order to understand the effect of processingparameters on the functional properties of the isolate. The major purpose of this research is to studythe foamability of the different proteins - starch nano-particle system. The results from exper...
متن کاملData characterizing tensile behavior of cenosphere/HDPE syntactic foam
The data set presented is related to the tensile behavior of cenosphere reinforced high density polyethylene syntactic foam composites "Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine" (Bharath et al., 2016) [1]. The focus of the work is on determining the feasibility of using an industrial scale polymer injection molding (PIM) machine f...
متن کامل