WE-Harvest: A Wearable Piezoelectric-Electromagnetic Energy Harvester
نویسندگان
چکیده
Wearable electronics require a sustainable electrical power supply to operate. Energy harvesting techniques can be used to convert available nonelectrical energy sources into electrical energy. This paper presents WE-Harvest, a new wearable energy harvesting system that combines the piezoelectric and electromagnetic energy harvesters for wearable devices. Regular human body motions, such as moving the arm, provide the input vibrations. A two-stage modified Dickson multiplier is used to step up the output voltage. The experimental results demonstrate that the combined topology enhances the power transfer efficiency. The dependence of energy harvester output on the load and input frequency has also been investigated.
منابع مشابه
Models for 31-Mode PVDF Energy Harvester for Wearable Applications
Currently, wearable electronics are increasingly widely used, leading to an increasing need of portable power supply. As a clean and renewable power source, piezoelectric energy harvester can transfer mechanical energy into electric energy directly, and the energy harvester based on polyvinylidene difluoride (PVDF) operating in 31-mode is appropriate to harvest energy from human motion. This pa...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملCharacterization of a rotary piezoelectric energy harvester based on plucking excitation for knee-joint wearable applications
Wearable medical and electronic devices demand a similarly wearable electrical power supply. Humanbased piezoelectric energy harvesters may be the solution, but the mismatch between the typical frequencies of human activities and the optimal operating frequencies of piezoelectric generators calls for the implementation of a frequency up-conversion technique. A rotary piezoelectric energy harves...
متن کاملA Shoe-Embedded Piezoelectric Energy Harvester for Wearable Sensors
Harvesting mechanical energy from human motion is an attractive approach for obtaining clean and sustainable electric energy to power wearable sensors, which are widely used for health monitoring, activity recognition, gait analysis and so on. This paper studies a piezoelectric energy harvester for the parasitic mechanical energy in shoes originated from human motion. The harvester is based on ...
متن کامل