Permanent Magnet Quadrupoles for CESR Phase-III Upgrade

نویسنده

  • W. Lou
چکیده

The CESR Phase-III upgrade plan includes very strong permanent magnet quadrupoles in front of the cryostat for the superconducting quadrupoles and physically as close as possible to the interaction point. Together with the superconducting quadrupoles, they provide tighter vertical focusing at the interaction point. The quadrupoles are built with Neodymium Iron Boron (NdFeB) material and operate inside the 15 kG solenoid field. Requirements on the field quality and stability of these quadrupoles are discussed and test results are presented.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CBN 99-16 CESR PERFORMANCE and UPGRADE STATUS

The CESR electron-positron collider operates with nine trains of closely spaced bunches stored in each beam. During the Fall of 1998 the number of bunches in each of the trains was increased from three to four and the spacing of the bunches reduced from 28ns to 14ns. A beam current of 550mA was supported by two single cell superconducting cavities and two 5-cell copper cavities. We measured a p...

متن کامل

The Superconducting Interaction Region Magnet Positioning System for the CESR Phase III Upgrade

Due to the extraordinary sensitivity of beams to misalignments of the superconducting high gradient interaction region magnets for the Phase III upgrade, a beam-based alignment and active positioning scheme has been designed and is being constructed. Using cams and kinematic mounting, the magnetic centers of the four quadrupole magnets will be independently positioned over a radial range of 1 m...

متن کامل

CBN 95 - 18 1 Interaction Region Optimization for CESR Phase III

The space around the interaction region is some of the most highly utilized due to its importance to both CESR and CLEO. It is therefore desirable to try to optimize the design of the components in that space to a greater extent than is usually done for accelerator systems. In this paper I describe an optimization of the CESR portion of interaction region I developed and used to generate the sp...

متن کامل

Permeable Materials in the CLEO III Magnetic Field

Two pairs of superconducting magnets will be inserted into CLEO as part of the CESR/CLEO phase III upgrade. Stray elds from the superconducting magnets will a ect the eld quality of the solenoid in the sensitive region of the CLEO detector. This problem was analyzed in [1]. In addition, the superconducting magnets will be supported by an active, high precision positioning system. Parts of the p...

متن کامل

The Interaction between a Beam and a Superconducting Cavity Module: Measurements in CESR and CESR-Phase III Goals*

Plans for the next generation of electron-positron colliders (B-factories and B-factory-like machines) call for high beam currents to produce luminosities of the order of 1033. To store these high currents in a machine, special attention must be paid to the interaction of the beam with discontinuities in the surrounding vacuum chamber. RF cavities are among the biggest perturbations in accelera...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997