Monolayer graphene/SiC Schottky barrier diodes with improved barrier height uniformity as a sensing platform for the detection of heavy metals
نویسندگان
چکیده
A vertical diode structure comprising homogeneous monolayer epitaxial graphene on silicon carbide is fabricated by thermal decomposition of a Si-face 4H-SiC wafer in argon atmosphere. Current-voltage characteristics of the graphene/SiC Schottky junction were analyzed by applying the thermionic-emission theory. Extracted values of the Schottky barrier height and the ideality factor are found to be 0.4879 ± 0.013 eV and 1.01803 ± 0.0049, respectively. Deviations of these parameters from average values are smaller than those of previously observed literature data, thereby implying uniformity of the Schottky barrier height over the whole diode area, a stable rectifying behaviour and a good quality of ohmic palladium-graphene contacts. Keeping in mind the strong sensitivity of graphene to analytes we propose the possibility to use the graphene/SiC Schottky diode as a sensing platform for the recognition of toxic heavy metals. Using density functional theory (DFT) calculations we gain insight into the nature of the interaction of cadmium, mercury and lead with graphene as well as estimate the work function and the Schottky barrier height of the graphene/SiC structure before and after applying heavy metals to the sensing material. A shift of the I-V characteristics of the graphene/SiC-based sensor has been proposed as an indicator of presence of the heavy metals. Since the calculations suggested the strongest charge transfer between Pb and graphene, the proposed sensing platform was characterized by good selectivity towards lead atoms and slight interferences from cadmium and mercury. The dependence of the sensitivity parameters on the concentration of Cd, Hg and Pb is studied and discussed.
منابع مشابه
Role of the Potential Barrier in the Electrical Performance of the Graphene/SiC Interface
In spite of the great expectations for epitaxial graphene (EG) on silicon carbide (SiC) to be used as a next-generation high-performance component in high-power nanoand micro-electronics, there are still many technological challenges and fundamental problems that hinder the full potential of EG/SiC structures and that must be overcome. Among the existing problems, the quality of the graphene/Si...
متن کاملGraphite based Schottky diodes on Si, GaAs, and 4H-SiC
Todd Schumann, Sefaattin Tongay, Arthur F. Hebard Department of Physics, University of Florida, Gainesville FL 32611 This article demonstrates the formation of Schottky diodes on silicon (Si), gallium arsenide (GaAs), and 4H-silicon carbide (4H-SiC) using the semimetal graphite. The forward bias characteristics follow thermionic emission theory, and the extracted Schottky barrier heights closel...
متن کاملSchottky barrier inhomogeneities at the interface of few layer epitaxial graphene and silicon carbide
In this work, we study electron transport across the heterojunction interface of epitaxial few-layer graphene grown on silicon carbide and the underlying substrate. The observed Schottky barrier is characterized using current-voltage, capacitance-voltage and photocurrent spectroscopy techniques. It is found that the graphene/SiC heterojunction cannot be characterized by a single unique barrier ...
متن کاملInhomogeneity in barrier height at graphene/Si (GaAs) Schottky junctions.
Graphene (Gr) interfaced with a semiconductor forms a Schottky junction with rectifying properties, however, fluctuations in the Schottky barrier height are often observed. In this work, Schottky junctions are fabricated by transferring chemical vapor deposited monolayer Gr onto n-type Si and GaAs substrates. Temperature dependence of the barrier height and ideality factor are obtained by curre...
متن کامل