Single-Layer Bandpass Active Frequency Selective Surface
نویسنده
چکیده
A single-layer, bandpass, active FSS is presented. It shows good angle of incidence stability for TE incidence, at the operating frequency of 2.45 GHz. It is based on circular loop aperture with each unit cell having four PIN diodes. A novel method for dc biasing is used. About 12 dB average variation in transmission loss, between ON and OFF states, has been experimentally achieved at 2.45 GHz.
منابع مشابه
Single - Layer Bandpass Active Frequency Selective Surface
If you believe this document infringes copyright then please contact the KAR admin team with the take-down information provided at http://kar.kent.ac.uk/contact.html Citation for published version Ghaffer, I Kiani. and Ford, Kenneth L. and Esselle, Karu P. and Weily, Andrew R. and Panagamuwa, C. and Batchelor, John C. (2008) Single-Layer Bandpass Active Frequency Selective Surface. Microwave an...
متن کاملA Simple Synthesis Technique of Single- Square-loop Frequency Selective Surface
In this manuscript, a simple synthesis method of single square loop frequency selective surface (SSLFSS) is discussed, which may find the suitable application in the fast analysis and fabrication of the frequency-selective surface. The presented technique is used to design SSLFSS at 3 GHz, 15 GHz, 22GHz and 26GHz. At every frequency of interest, the analytical result is very close to the requir...
متن کاملFabrication of mid-infrared frequency-selective surfaces by soft lithography.
We describe the fabrication of large areas (4 cm(2)) of metallic structures or aperture elements that have ~100-350-nm linewidths and act as frequency-selective surfaces. These structures are fabricated with a type of soft lithography-near-field contact-mode photolithography-that uses a thin elastomeric mask having topography on its surface and is in conformal contact with a layer of photoresis...
متن کاملFrequency-selective Surface Based Bandpass Filters in the Near-infrared Region
A spatial bandpass filter resonant at 1.5 m and based on a frequency-selective surface (FSS) was analyzed and fabricated. It consists of circular apertures arranged in a hexagonal lattice and was modeled using a hybrid finite-element/boundary-integral method, which accounted for metal thickness and conductivity. Measurements demonstrate the accuracy of the design. © 2004 Wiley Periodicals, Inc....
متن کاملA New Implementation of Frequency Selective Surface Cloak for Cylindrical Structures
The main purpose of this paper is to design, implement and measure a new sample of mantle cloak. A new method called mantle cloak is introduced by cloaking an object by a single, conformal meta-surface which can drastically suppress the scattering of the desired object. In this paper, a grid lattice is placed around a dielectric object as the cloaking structure. Previously, this FSS has been ut...
متن کامل