Lattice truss structures from expanded metal sheet

نویسندگان

  • Gregory W. Kooistra
  • Haydn N.G. Wadley
چکیده

Metallic lattice truss structures are usually made by perforating a metal sheet with a periodic diamond pattern followed by folding at node rows to create a plate of 3D interconnected trusses. For low relative density lattices, the initial sheet material is inefficiently utilized, and the node area is small raising concerns about node bond robustness under shear or tensile loading. Here, we explore a simple approach for making open cell, pyramidal lattice truss structures with robust nodes and close to 100% utilization of the sheet material. Aluminium alloy lattices with a relative density of 5.7% were fabricated and bonded to aluminium alloy facesheets using a brazing technique. They have been tested in through thickness compression, and in both transverse and longitudinal shear. The lattice truss structures made by this approach have a normalized compressive peak strength close to the predicted maximum. The non-dimensional transverse and longitudinal shear strengths were also close to theoretical predictions. No node failures were observed during plastic shear straining up to 20%. 2005 Published by Elsevier Ltd.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium

Open cell, lattice truss structures have been made by folding perforated 6061 aluminium alloy sheets. Simple air brazing is used to construct sandwich panels with cellular core relative densities between 0.02 and 0.08. Some panels were quenched and aged while others were tested in an annealed condition. The measured peak compressive strengths varied from 0.7 to 20 MPa, increasing with core rela...

متن کامل

Bending behavior of lightweight sandwich-walled shells with pyramidal truss cores

A study on the bending response of a composite curved panel with pyramidal metallic truss cores suitable for functional applications is presented using a combination of analytical modeling, three-point bending experiments and finite element (FE) based simulations. The aluminum pyramidal cores were constructed using an interlocking method before curing with composite face sheets to fabricate the...

متن کامل

Fabrication and structural performance of periodic cellular metal sandwich structures

Metallic sandwich panels with periodic, open-cell cores are important new structures, enabled by novel fabrication and topology design tools. Fabrication protocols based on the sheet forming of trusses and shell elements (egg-boxes) as well as textile assembly have allowed the manufacture of robust structures by inexpensive routes. Topology optimization enables control of failure mechanisms at ...

متن کامل

Three-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining

We present a novel method for fabricating carbon fiber composite sandwich panels with lattice core construction by means of electrical discharge machining (EDM). First, flattop corrugated carbon fiber composite cores were fabricated by a hot press molding method. Then, two composite face sheets were bonded to each corrugated core to create precursor sandwich panels. These panels were transforme...

متن کامل

STRUCTURAL ANALYSIS AND STRUCTURAL OPTIMIZATION OF SELF-SUPPORTING TRUSS TOWERS TO SUPPORT A LARGE WIND TURBINE

This article aims to study the self-supporting truss towers used to support large wind turbines. The goal is to evaluate and validate numerically by finite element method the structural analysis when the lattice structures of the towers of wind turbines are subjected to static loads and these from common usage. With this, it is expected to minimize the cost of transportation and installation of...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006