QPSK Modulator on FPGA using 64 Values ROM

نویسندگان

  • Prashant D. Thombare
  • Ameed. M. Shah
چکیده

In many applications such as TDMA cellular telephone, OFDM, Bluetooth, Satellite communication etc. QPSK digital modulation technique is used due to its higher bandwidth efficiency, higher noise immunity and simpler circuit. Simpler circuit is having lower cost, smaller size and lower power dissipation. In this paper a new circuit for QPSK modulator is designed which improves the area of the circuit. It is having lower logic elements than conventional design which provide same output. The circuit designing is performed on Active-HDL9.2 and implemented on Spartan II (XC2S30-5PQ208) FPGA board using Xilinx ISE9.1i and results are observed on DSO using Digital to Analog Convertor (DAC). The area of the design is found to be lower in total logic elements than the conventional design. Keywords— QPSK, FPGA, ROM, Flip-Flops, Modulation etc.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

FPGA Implementation of High Throughput Digital QPSK Modulator using Verilog HDL

This paper proposes a Quadrature Phase Shift Keying (QPSK) using two different methods. QPSK is one of the forms of Phase Shift Keying (PSK) modulation scheme. Generally a conventional QPSK modulator with Direct Digital Synthesizer (DDS) and arithmetic multiplier separates base band signal into I and Q phase which consumes low throughput with complexity in hardware implementation. Hence to gene...

متن کامل

Field-programmable gate array (FPGA)-based designed using VHDL hardware description language transmission performance analysis of binary phase shift keying (BPSK) and quadrature phase shift Keying (QPSK) modulators

Binary phase shift keying (BPSK) and quadrature phase shift Keying (QPSK) modulation techniques are often proposed for satellite communications and band-limited communication channels; however, both modulations are important in high speed data communications. High speed data communications are implemented on high speed hardware in wireless systems. The paper presents the design of a QPSK and BP...

متن کامل

Design of an Area-Efficient Interpolated FIR Filter Based on LUT Partitioning

With the on-going research to introduce multimedia capabilities into digital mobile communication systems, communication standards specify the use of enabling technologies such as the 3-channel W-CMDA mobile station modulator [1]. Pulse-shaping 1:4 interpolated FIR filters are employed in each band-limited Quadrature Phase Shift Keying (QPSK) modulator to provide in-band spectral shaping while ...

متن کامل

Hardware Solutions for High Data Rate Modems

The exponentially-growing mobile data traffic imposes significant demands on the capacity of the mobile network. Fiber optic and microwave links are two main solutions for the mobile backhaul network, which provides connectivity between radio base station (RBS) sites and the switch sites. As compared to fiber, a microwave solution is much easier to deploy, however, its capacity is lower. This t...

متن کامل

Efficient Implementation of FPGA to Generate the Address for Various Code Rates/Modulation Scheme of Wimax Deinterleaver without Manual Computation

The main aim of this paper is to reduce floor function concept which is very difficult to implement Field Programmable Gate Array (FPGA) associated with the standards of IEEE 802.16.So instead we use a simple mathematical steps of algorithm in order to generate an address for WiMAX Deinterleaver so that low power and novel technique is obtained using Xilinx Field Programmable Gate Array (FPGA)....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014