Zinc Oxide Hydrogen Sulfide Removal Catalyst/ Preparation, Activity Test and Kinetic Study
نویسندگان
چکیده
Hydrogen sulfide removal catalyst was prepared chemically by precipitation of zinc bicarbonate at a controlled pH. The physical and chemical catalyst characterization properties were investigated. The catalyst was tested for its activity in adsorption of H2S using a plant that generates the H2S from naphtha hydrodesulphurization and a unit for the adsorption of H2S. The results comparison between the prepared and commercial catalysts revealed that the chemical method can be used to prepare the catalyst with a very good activity. It has observed that the hydrogen sulfide removal over zinc oxide catalyst follows first order reaction kinetics with activation energy of 19.26 kJ/mole and enthalpy and entropy of activation of 14.49 kJ/mole and -220.41 J/mole respectively.
منابع مشابه
Preparation of ZnO and ZnS nanoparticles and in-vitro study of their antimicrobial effect
Zinc sulfide (ZnS) & zinc oxide (ZnO) nanoparticles was evaluated for their antimicrobial activity against four pathogenic strains. ZnS&ZnO nanoparticles were synthesized by simple aqueous chemical reaction in an aqueous solution. The main advantage of these nanoparticles (size of 10-30 nm) was that simply could be prepared by using cheap precursors in a cost effective and high throughput manne...
متن کاملPhotocatalytic Removal of Acid Blue 113 Dye from Aqueous Solutions Using Zinc Oxide-Kaolin Nanocomposite under Visible Light Irradiation
Background and purpose: Textile industries produce huge amounts of colored wastewater. Synthetic dyes cause serious problems to human health and aquatic organisms due to their toxic and carcinogenic properties. In this study, Acid Blue 113 (AB113), which is stable and persistent against conventional treatment methods was selected as the target contaminant. Materials and methods: The synthesis ...
متن کاملSignificance of Chemical Decomposition of Chloroethyl Phenyl Sulfide (CEPS) using Zinc-Cadmium Oxide (ZnO-CdO) Nanocomposite
The zinc-cadmium oxide (ZnO-CdO) nanocomposites with different weight percentages of cadmium oxide (CdO) nanoparticles were successfully synthesized by the sonochemical method using zinc and cadmium nitrates as precursors to probe their nano-structured surfaces for the decomposition reactions of chloroethyl phenyl sulfide (CEPS) as a surrogate of sulfur mustard agent simulant. Scanning electron...
متن کاملSolvent Selection in Impregnation of Zinc Oxide Nanoparticles into MCM-41 Investigation of Its Ability Toward H2S Removal from Crude Oil
Silicate mesoporous materials are of the main interesting adsorbents for decreasing of hydrogen sulfide (H2S) from crude oil. In this work zinc impregnated highly ordered MCM-41 was synthesized via post-synthesis functionalization and was used as adsorbent for removal of H2S from crude oil. Also the variation of solvents was mainly adjusted. In order to determine the ideal solvent for t...
متن کاملSignificance of Chemical Decomposition of Chloroethyl Phenyl Sulfide (CEPS) using Zinc-Cadmium Oxide (ZnO-CdO) Nanocomposite
The zinc-cadmium oxide (ZnO-CdO) nanocomposites with different weight percentages of cadmium oxide (CdO) nanoparticles were successfully synthesized by the sonochemical method using zinc and cadmium nitrates as precursors to probe their nano-structured surfaces for the decomposition reactions of chloroethyl phenyl sulfide (CEPS) as a surrogate of sulfur mustard agent simulant. Scanning electron...
متن کامل