Implementation of Microcontroller Based Driver Circuit for Plasma Display Panel
نویسندگان
چکیده
The model of the new zero-voltage and zero current switching energy recovery display driver for a Plasma Display Panel is proposed. This operation helps to achieve the zero-voltage turn on of all main power switches and zero-current turn-off of all auxiliary power switches, reduce the EMI noise, current stress in Mode 2 and Mode 3 operation, and improve the energy recovery capability. This paper presents the simulation and implementation of microcontroller based driver circuit for plasma display panel. Moreover, it has the simpler structure, fewer power devices, and lower cost of production than the Weber’s driver. The experimental results concur with simulation results.
منابع مشابه
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor
In the presented paper, a sensorless driver circuit is designed, constructed and tested to control two types of three-phase Switched Reluctance Motor (SRM). The presented control algorithm has three steps. In the first step, the SRM is controlled by an open-loop method. In the second step, mathematical model of the SRM phase, motor parameters and flux-current-rotor position relation are used in...
متن کاملDesign and Implementation of the Predictive Current Control Strategy in the Single Phase Photovoltaic Grid-Connected Inverter Based on Microcontroller
In this paper, photovoltaic (PV) grid-connected inverter which is the core device in PV grid-connected system has been in depth research.An improved predictive current controller has been developed by the Authors for single-phase grid-connected voltage source inverters (VSI).Based on DSP TMS320LF2407A, a 10 kW single-phase grid-connected inverter has been built in this paper.Thus is aimed at us...
متن کاملAn energy-recovery sustaining driver with discharge current compensation for AC plasma display panel
A novel driver with discharge current compensation is proposed to drive an ac plasma display panel (PDP). This proposed circuit uses resonance between the inductor and the ac PDP to avoid abrupt charging/discharging. The four switches of the full bridge are all operated with zero-voltage-switching turn-on. In addition, an 8-in ac PDP equipped with the proposed driving circuit, operating at 100 ...
متن کاملMicrocontroller-Based Moving Message Display Powered by Photovoltaic Energy
The aim of this paper is to design a textual display system, based on a light emitting diode (LED) dot matrix array powered by solar energy. The paper involves taking the device from an initial concept, through a design phase, to constructing a prototype of the product. The system consists of the display unit, which is powered from a photovoltaic ( PV) module and a solar sealed lead acid batter...
متن کاملFig.1 Pdp Module Drive Circuit Pdp Scan Driver Ic
A shift in consumer electronics from analog to digital technology is underway, and the television industry is transitioning from CRT to flat panel display (FPD) technology. With the increasing popularity of FPDs, the market for plasma display panels (PDPs) has also grown rapidly. The FPD market is divided according to screen size: sizes of 30 inches and smaller use liquid crystal display (LCD) ...
متن کامل