Adhesion Strength Evaluation Methods in Thermally Sprayed Coatings
نویسندگان
چکیده
The techniques for estimating the adhesive and cohesive strength in high velocity oxy fuel (HVOF) thermal spray coatings have been discussed and compared. The development trend and the last investigation have been studied. We will focus on benefits and limitations of these methods in different process and materials. Keywords—Adhesion, Bonding strength, Cohesion, HVOF Thermal spray
منابع مشابه
The Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملEffect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating
In this study, the effect of surface roughness and roughness morphology on the bond strength of WC-Co-Cr coatings has investigated. The three different surfaces morphology are use for this purpose. The first and tow samples sandblasted with alumina and silicon carbide respectively. Other sample no sandblasted before spraying process. The same WC-10Co-4Cr coating deposited on the substrates with...
متن کاملDetermination of nonlinear properties of thermal sprayed ceramic coatings via inverse analysis
A robust procedure to estimate nonlinear mechanical properties of thermally sprayed (TS) ceramic coatings is introduced. Such a method is valuable particularly for TS coatings since each may possess unique properties depending upon its processing condition. Traditionally, their responses have been assumed as linear elastic (isotropic or anisotropic) except in very high temperature environments ...
متن کاملParametric Appraisal of Process Parameters for Adhesion of Plasma Sprayed Nanostructured YSZ Coatings Using Taguchi Experimental Design
This paper presents the application of the Taguchi experimental design in developing nanostructured yittria stabilized zirconia (YSZ) coatings by plasma spraying process. This paper depicts dependence of adhesion strength of as-sprayed nanostructured YSZ coatings on various process parameters, and effect of those process parameters on performance output has been studied using Taguchi's L16 orth...
متن کاملControl of Coating Properties of Abradable Seals by On-Line Process Diagnostics
The efficiency of gas turbines is highly dependent upon the clearance between compressor housing and rotating blades. Abradable seal coatings are employed to minimize the clearance and control the over-tip leakage by allowing the blade tips to cut into the coating and herewith implementing a method of self-adjustment. These coatings consist of a thermally sprayed multiphase material, comprising...
متن کامل