Reduced Models for Ferromagnetic Thin Films with Periodic Surface Roughness
نویسندگان
چکیده
We investigate the influence of periodic surface roughness in thin ferromagnetic films on shape anisotropy and magnetization behavior inside the ferromagnet. Starting from the full micromagnetic energy and using methods of homogenization and [Formula: see text]-convergence, we derive a two-dimensional local reduced model. Investigation of this model provides an insight into the formation mechanism of perpendicular magnetic anisotropy and uniaxial anisotropy with an arbitrary preferred direction of magnetization.
منابع مشابه
Preparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices
In this work, aluminum nitride (AlN) thin films with different thicknesses were deposited on quartz and silicon substrates using single ion beam sputtering technique. The physical and chemical properties of prepared films were investigated by different characterization technique. X-ray diffraction (XRD) spectra revealed that all of the deposited films have an amorphous str...
متن کاملMagnetic Surface Anisotropy in Ferromagnetic Thin Films with Two Rough Surfaces
Abstract In this paper the magnetostatic energy in a ferromagnetic thin film with two imperfect, rough surfaces has been calculated. It has been shown that the surface roughness gives in some cases a considerable contribution to an effective perpendicular anisotropy. Within the model assumed it has been proved that the value of magnetostatic energy and, as a consequence, the anisotropy in a thi...
متن کاملThe Effects Of Interfacial Roughness On The Argon Ion Implanted Tantalum Films
In the present study, effect of interfacial roughness on the ion implanted Tantalum based surfaces has been investigated. The argon ions with energy of 30 keV and in doses of 1×1017 , 3×1017 , 5×1017 , 7×1017 , and 10×1017 (ion/cm2) have been used at ambient temperature. The Atomic Force Microscopy (AFM), analysis have been used to study and characterize the surfaces morphology. The effect of ...
متن کاملOPTICAL PROPERTIES OF THIN Cu FILMS AS A FUNCTION OF SUBSTRATE TEMPERATURE
Copper films (250 nm) deposited on glass substrates, at different substrate temperatures. Their optical properties were measured by ellipsometery (single wavelength of 589.3 nm) and spectrophotometery in the spectral range of 200–2600 nm. Kramers Kronig method was used for the analysis of the reflectivity curves of Cu films to obtain the optical constants of the films, while ellipsometery measu...
متن کاملInvestigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application
CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...
متن کامل