Cryogenic plasmas for controlled processing of nanoporous materials.
نویسندگان
چکیده
Plasma processing at cryogenic temperatures tremendously suppresses the depth penetration of plasma radical species within nanoporous materials. We demonstrate that this confining effect is surprisingly unrelated to changes in the phase diffusivity of radical species gas, but is determined by the increase of the sticking coefficient and the radical recombination and reaction factors, favoring an early irreversible surface adsorption of the plasma radical species.
منابع مشابه
Nanoporous Xerogel for Adsorption of Pb2+ and Cd2+
Classical xerogels are robust, inexpensive and nontoxic materials with low-ordered nanoporous structures. In water streams where the pH is higher than the Point of Zero Charge, the surface of classical xerogels such as tetraethoxy orthosilan (TEOS) xerogel is negatively charged. It was assumed that a xerogel can work as a strong adsorbent for metal ions without further modification. Therefore, ...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملDetermination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics
Nanoporous glass-ceramics were prepared with composition 45CaO-25TiO2-35P2O5 (mol%). Two molar percent of Na2O was added as a flux to the composition. With the aforementioned composition, glass melted and crystallized into glass-ceramics containing β-Ca3(PO4)2 and CaTi4(PO4)6 as the main phases. The differential thermal analysis (DTA) was conducted to determine the suitable temperatures f...
متن کاملAdvanced Plasma Processing: Etching, Deposition, and Wafer Bonding Techniques for Semiconductor Applications
Plasma processing techniques are one of the cornerstones of modern semiconductor fabrication. Low pressure plasmas in particular can achieve high radical density, high selectivity, and anisotropic etch profiles at low temperatures and mild voltages. This gentle processing environment prevents unwanted diffusion and degradation of materials due to heat and lattice damage from ion bombardment. Pl...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical chemistry chemical physics : PCCP
دوره 13 9 شماره
صفحات -
تاریخ انتشار 2011