Grasp Planning for a Humanoid Hand

نویسندگان

  • Tokuo Tsuji
  • Kensuke Harada
  • Kenji Kaneko
  • Fumio Kanehiro
  • Kenichi Maruyama
چکیده

We focus on grasp planning for a humanoid multi-fingered hand attached at the tip of a humanoid robot’s arm. The hand has potential possibility to grasp various objects under several situations. Since the multi-fingered hand can use several grasp types such as fingertip grasp, and envelope grasp with taking the advantage of degrees of freedom. We develop grasp planner which selects a feasible grasp type based on the task, and determines contact positions for the fingers and the grasped object surface so that the fingers do not drop the object while staying with limited actuator capacity. To grasp an object, the robot first measures object position/orientation using vision sensor. Then, the planner plans the bodymotion to complete the grasping task based on vision sensor information. Even when the object’s location is not known beforehand, the robot should complete the grasping task as fast as possible. However, grasp planning with a humanoid robot is complex and often requires long calculation time. Hence, for the grasp planning, a heuristic but fast algorithm is preferred rather than precise but slow algorithms (Shimoga (1989)). Our planner calculates grasp motions within reasonable time by using predefined grasp types which are assigned with contacting finger links, desired sizes of the grasped object. Our planner selects a grasp type according to position/orientation of the grasped object similar to a human. As shown in Fig. 1 , a human grasps the side of the can with all fingers, grasps the top with fewer fingers. Failing to find feasible grasping posture using arm/hand kinematics alone, our planner attempts to do so using the full body kinematics. Using the degrees of freedom of full body, the planner has adaptable for reaching the object with the several motions such as twisting waist, bending waist, and squatting down. We demonstrate effectiveness of grasp planning through simulation and experimental results by using humanoid robot HRP-3P (Akachi et al. (2005)) shown in Fig. 2, which has a four-fingered hand HDH (Kaneko et al. (2007)) on its right-arm and a stereo camera system in its head. We has proposed the grasp planning which was executed within the reasonable time taking into account several constraints imposed on the system such as the feasible grasping style, the friction cone constraint at each contact point, the maximum contact force applied by the fingers, the inverse kinematics of the arm and the fingers (Harada et al. (2008); Tsuji et al. (2008; 2009)). The originality of our method is the following points; 4

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Grasp Planning for a Multifingered Hand with a Humanoid Robot

This paper presents grasp planning for a multifingered hand with a humanoid robot. Our planner selects different ways of grasping even for the same object according to object position/orientation. If the planner cannot find a feasible grasp with arm/hand kinematics, it switches to full body motion planning. These functions are necessary for realizing the robust grasp planning. Our planner defin...

متن کامل

Simultaneous Grasp and Motion Planning

In this work, we present an integrated approach for planning collision-free grasping motions. The proposed Grasp–RRT planner combines the three main tasks needed for grasping an object: building a feasible grasp, solving the inverse kinematics problem and searching a collision-free trajectory that brings the hand to the grasping pose. Therefore, RRT-based algorithms are used to build a tree of ...

متن کامل

Simply Grasping Simple Shapes: Commanding a Humanoid Hand with a Shape-Based Synergy

Despite rapid advancements in dexterity and mechanical design, the utility of humanoid robots outside of a controlled laboratory setting is limited in part due to the complexity involved in programming robots to grasp common objects. There exists a need for an efficient method to command high degree-of-freedom (DoF) position-controlled dexterous manipulators to grasp a range of objects such tha...

متن کامل

Templates for pre-grasp sliding interactions

In manipulation tasks that require object acquisition, pre-grasp interaction such as sliding adjusts the object in the environment before grasping. This change in object placement can improve grasping success by making desired grasps reachable. However, the additional sliding action prior to grasping introduces more complexity to the motion planning process, since the hand pose relative to the ...

متن کامل

An Anthropomorphic Grasping Approach for an Assistant Humanoid Robot

In this paper we present a framework for grasp planning with a humanoid robot arm and a five-fingered hand. The aim is to provide the humanoid robot with the ability of grasping objects that appear in a kitchen environment. Our approach is based on the use of an object model database that contains the description of all the objects that can appear in the robot workspace. This database is comple...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012