Measurements of the longitudinal wave speed in thin materials using a wideband PVDF transducer.

نویسندگان

  • Kwang Yul Kim
  • Wei Zou
  • Steve Holland
  • Wolfgang Sachse
چکیده

A flat transducer was constructed, using a 9-microm-thick PVDF (polyvinylidene fluoride) film for generation and detection of high-frequency ultrasonic waves, and used for measurements of the phase velocity of longitudinal waves traveling along the thickness direction in a very thin material. The transducer has a useful wideband frequency characteristic extending from 10 MHz to over 150 MHz. Measurements of the phase velocity of the longitudinal waves are carried out using a 0.212-mm-thick glass slide and a 0.102-mm-thick stainless-steel shim, using water as a coupling medium. The thickness limit for this measurement appears to be approximately 20 microm. The phase velocity of the longitudinal mode is obtained as a function of frequency in the frequency domain by using a modified sampled continuous wave (cw) technique. It can also be measured in the time domain by using a broadband pulse of short duration.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Low-cost Vector Network Analyzer for Biomedical Applications

A low-cost and portable vector network analyzer (VNA) which covered operating frequency between 1MHz to 3GHz is used for vector reflection coefficient and standing wave ratio (swr) of the various microstrip antennas. This paper presents measurements of various ultra wideband (uwb) microstrip antennas for applications in biomedical field. Selection of antenna is an important key for detection of...

متن کامل

Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer

A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...

متن کامل

Design and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer

A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...

متن کامل

A Four-Quadrant PVDF Transducer for Surface Acoustic Wave Detection

In this paper, a polyvinylidene fluoride (PVDF) piezoelectric transducer was developed to detect laser-induced surface acoustic waves in a SiO(2)-thin film-Si-substrate structure. In order to solve the problems related to, firstly, the position of the probe, and secondly, the fact that signals at different points cannot be detected simultaneously during the detection process, a four-quadrant su...

متن کامل

Sensitivity Analysis of a Wideband Backward-wave Directional Coupler Using Neural Network and Monte Carlo Method (RESEARCH NOTE)

In this paper sensitivity analysis of a wideband backward-wave directional coupler due to fabrication imperfections is done using Monte Carlo method. For using this method, a random stochastic process with Gaussian distribution by 0 average and 0.1 standard deviation is added to the different geometrical parameters of the coupler and the frequency response of the coupler is estimated. The appli...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of the Acoustical Society of America

دوره 114 3  شماره 

صفحات  -

تاریخ انتشار 2003