Design of a Low-Power CMOS LVDS I/O Interface Circuit
نویسنده
چکیده
The paper presents the design and implementation of LVDS (low-voltage differential signaling) receiver circuit, fully compatible with LVDS standard. The proposed circuit is composed of the telescopic amplifier and the comparator with internal hysteresis. The receiver supports 3.5 Gbps data rate with 7.4 mA current at 1.8 V supply according to post-layout circuit simulations. The circuit has the power consumption of 13.1 MW. Comparing with the conventional circuit, the circuit is achieved to reduce the power consumption by 19.1% and the data rate by 14.3%. The validity and effectiveness of the proposed circuit are verified through the circuit simulation with Samsung 0.18 μm CMOS (complementary metal-oxide-semiconductor) standard technology under the 1.8 V supply voltage.
منابع مشابه
LVDS I/O Interface for Gb/s-per-Pin Operation in 0.35- m CMOS
This paper presents the design and the implementation of input/output (I/O) interface circuits for Gb/s-per-pin operation, fully compatible with low-voltage differential signaling (LVDS) standard. Due to the differential transmission technique and the low voltage swing, LVDS allows high transmission speeds and low power consumption at the same time. In the proposed transmitter, the required tol...
متن کاملLow-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملLow-power LVDS for digital readout circuits
This paper presents a mixed-signal LVDS driver in 90 nm CMOS technology. The designed LVDS core is to be used as a data link between Infrared Focal Plane Array (IRFPA) detector end and microprocessor input. Parallel data from 220 pixels of IRFPA is serialized by LVDS driver and read out to microprocessor. It also offers a reduced power consumption rate, high data transmission speed and utilizes...
متن کاملDual Channel , 16 - Bit , 160 MSPS Analog - to - Digital Converter with DDR LVDS Outputs
The ADC16DV160 is a monolithic dual channel high performance CMOS analog-to-digital converter capable of converting analog input signals into 16-bit digital words at rates up to 160 Mega Samples Per Second (MSPS). This converter uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption and external component co...
متن کاملDesign of power-efficient adiabatic charging circuit in 0.18μm CMOS technology
In energy supply applications for low-power sensors, there are cases where energy should be transmitted from a low-power battery to an output stage load capacitor. This paper presents an adiabatic charging circuit with a parallel switches approach that connects to a low-power battery and charges the load capacitor using a buck converter which operates in continuous conduction mode (CCM). A gate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015