Modelling the pressure field in the vicinity of a microphone membrane using PIV
نویسندگان
چکیده
A new approach for for estimating the acoustic pressure in the near field of a microphone based on non-intrusive direct measurement of acoustic particle velocity is proposed. This method enables the estimation of the acoustic pressure inside a domain located in front of the microphone membrane. The acoustic pressure is calculated using the acoustic particle velocity on the frontiers of this domain and a physical model based on the Green function of the system. Results are obtained using the acoustic velocity measured with Particle Image Velocimetry (PIV) in front of a microphone excited with a plane wave inside a rectangular waveguide. They show that the diffraction of the plane wave by the microphone leads to an increase of the acoustic pressure on the microphone edge in the order of magnitude of 0.1 dB.
منابع مشابه
A MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملInvestigation of concentration polarization in a cross-flow nanofiltration membrane: Experiment and CFD modelling
Numerous researches have been investigated on the mass transfer phenomena and hydrodynamics for the fluid in the vicinity of the membrane surface by the mathematical modelling and simulation. Due to complexities involved in solving transport phenomena within membranes, the application of CFD simulation study for determining the concentration polarization (CP) profile in the membrane channel is ...
متن کاملComparisons of Experimental and Simulated Velocity Fields in Membrane Module Spacers
Spacers are used in spiral wound and plate and frame membrane modules to create flow channels between adjacent membrane layers and mix fluid within the flow channel. Flow through the spacer has a significant beneficial impact on mixing and resulting mass transfer rates but is accompanied by an undesirable increase in pressure drop. Computational Fluid Dynamics (CFD) is a common tool used to eva...
متن کاملTheoretical Performance Evaluation of Inorganic (Non Pd-Based) Membranes for Hydrogen Separation
The aim of this work theoretical study is to theoretically investigate a inorganic membrane assisted purifcation process of an H2-rich stream derived from a conventional methanol steam reforming stage. In particular, a black-box model for multicomponent gas mixture purifcation is dev...
متن کاملتحلیل عددی و میدانی مکانیزم انفجار تک چال در تودهسنگ کنگلومرای سد گتوند علیا
Several relations are presented in order to specify blasting dynamic loading associated with analytical, field and experimental analysis. Dynamic loading type, maximum pressure and consequent duration time can affect the numerical simulation results of fragmentations, damage zone and maximum radial crack length in the vicinity of the blast hole and ground vibrations. These in turn depend on the...
متن کامل