Useful Software Tool For Simulating Switched Reluctance Motors
نویسندگان
چکیده
Simulations are widely used in the study of both electrical machines and drives. In the literature, several simulation approaches can be found which can be also applied in the study of the switched reluctance motors (SRMs). The on-line SRM simulation tool developed by the authors and presented in this paper proved to be very useful both in checking the design of the motor, but also in setting up and verifying the proper control strategy of the motor. The simulation program can be very practical in teaching electrical machines and drives, and it can be extended to be used also in remote laboratories.
منابع مشابه
A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors
A design package is developed for a single-tooth per stator pole switched reluctance motor, 6/4. The rather simple assumed flux path method is used to estimate the unaligned permeance including the leakage permeances and the effects of shallow slot and tooth taper. The possibility of making rotor tooth width greater than stator tooth width is examined using the developed package. The result app...
متن کاملA New Doubly Segmented Structure for Switched Reluctance Motors with High Torque Capability
In this paper, a new magnetic structure for switched reluctance motors is presented. In this structure, both stator and rotor has a segmented topology and there is no magnetic flux path between two stator/rotor segments or any possible combination of them. The proposed segmental structure may be considered with different number of phases as well as different number of segments per phase for any...
متن کاملDesign, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor
In the presented paper, a sensorless driver circuit is designed, constructed and tested to control two types of three-phase Switched Reluctance Motor (SRM). The presented control algorithm has three steps. In the first step, the SRM is controlled by an open-loop method. In the second step, mathematical model of the SRM phase, motor parameters and flux-current-rotor position relation are used in...
متن کاملDirect Torque Control of 5-Phase 10/8 Switched Reluctance Motors
A switched Reluctance motor (SRM) has several desirable features, including simple construction, high reliability and low cost. However, it suffers from large torque ripple, highly non-uniform torque output and magnetization characteristics and large noise. Several studies have succeeded in torque ripple reduction for SRM using Direct Torque Control (DTC) technique. DTC method has many adva...
متن کاملDiagnosis of Different Types of Air-Gap Eccentricity Fault in Switched Reluctance Motors Using Transient Finite Element Method
This paper presents a method for diagnosis of eccentricity fault in a switched-reluctance motor (SRM) during offline and standstill modes. In this method, the fault signature is differential induced voltage (DIV) achieved by injecting diagnostic pulses to the motor windings. It will be demonstrated by means of results that there is a correlation between differential induced voltage and eccentri...
متن کامل