Application of Soft Computing for the Prediction of Warpage of Plastic Injection Molded Parts

نویسندگان

  • B. Sidda Reddy
  • Suresh Kumar
  • Vijaya Kumar Reddy
  • G. Padmanabhan
چکیده

This paper deals with the development of accurate warpage prediction model for plastic injection molded parts using soft computing tools namely, artificial neural networks and support vector machines. For training, validating and testing of the warpage model, a number of MoldFlow (FE) analyses have been carried out using Taguchi’s orthogonal array in the design of experimental technique by considering the process parameters such as mold temperature, melt temperature, packing pressure, packing time and cooling time. The warpage values were found by analyses which were done by MoldFlow Plastic Insight (MPI) 5.0 software. The artificial neural network model and support vector machine regression model have been developed using conjugate gradient learning algorithm and ANOVA kernel function respectively. The adequacy of the developed models is verified by using coefficient of determination. To judge the ability and efficiency of the models to predict the warpage values absolute relative error has been used. The finite element results show, artificial neural network model predicts with high accuracy compared with support vector machine model.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Warpage Prediction in Plastic Injection Molded Part Using Artificial Neural Network

The main objective of this paper is to predict the warpage of a circular injection molded part based on different processing parameters. The selected part is used as spacers in automotive, transmission, and industrial power generation industries. The second goal is facilitating the setup of injection molding machine without (any) need for trial and error and reducing the setup time. To meet the...

متن کامل

Fiber Reinforcement Induced Warpage on Injection Molded Thermoplastics

1 Abstract The warpage characterizations of injection molded plastic parts are not standardized and very challenging due to its complex process. This paper presents a novel examination method of the deformation of injection molded plastic parts especially for fiber reinforced materials. A special, but simple part was introduced for the description of the effect of different technological parame...

متن کامل

Abstract—The main objective of writing review on warpage optimization of injection molded plastic part is to investigate the optimization techniques used for minimization of warpage by optimizing process parameters

The main objective of writing review on warpage optimization of injection molded plastic part is to investigate the optimization techniques used for minimization of warpage by optimizing process parameters during injection molding. Highly complex design of plastic products now a days demands dimensional accuracy and good surface finish. As the injection molded part cools, uneven distribution of...

متن کامل

A Recurrent Neural Network for Warpage Prediction in Injection Molding

Injection molding is classified as one of the most flexible and economical manufacturing processes with high volume of plastic molded parts. Causes of variations in the process are related to the vast number of factors acting during a regular production run, which directly impacts the quality of final products. A common quality trouble in finished products is the presence of warpage. Thus, this...

متن کامل

Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composites via plastic injection molding

Plastic injection molding is discontinuous and a complicated process involving the interaction of several variables for control the quality of the molded parts. The goal of this research was to investigate the optimal parameter selection, the significant parameters, and the effect of the injection-molding parameters during the post-filling stage (packing pressure, packing time, mold temperature...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009