New Compact Triple-Band Microstrip Triangular Patch Antenna for WLAN/WiMAX Applications
نویسندگان
چکیده
In this paper, we propose a novel microstrip antenna for operating over a three frequency bands, covering the 2.4/5.2/5.8 GHz WLAN and 2.5/3.5/5.5GHz WiMAX bands. The proposed antenna occupies an area of 30 mm 40mm, when printed on FR4 substrate (εr=4.4, h=0.8mm). The antenna comprises of a triangular patch section, L-shaped parasitic elements on the edges of triangular patch and a 50Ω microstrip transmission line for excitation. Compact size, low cost and good radiation parameters respect to the previous designs are the most important advantages of the proposed antenna. Key word: Triple-Band, Microstrip Antenna, Parasitic elements, Triangular, WLAN, WiMAX.
منابع مشابه
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملA New Compact Microstrip-Fed Monopole Antenna for Triple Band WLAN/WiMAX Applications
A new compact printed tri-band antenna for WLAN/WiMAX applications is presented. The proposed antenna consists of three inverted L-shaped strips whose geometry looks like a “bent fork”. These strips are attached to the feed line through a horizontal strip. By optimizing the geometries of the inverted L-shaped strips, distinct resonant points can be effectively created for different frequency ba...
متن کاملCompact Triple-frequency Planar Monopole Antenna for Wimax/wlan Applications
A low-profile microstrip planar monopole antenna with triple-band operation for WiMAX and WLAN applications is proposed. The antenna has a simple structure which consists of a rectangular radiation patch with an L-shaped slot and an inverted L-shaped stub extending from the ground plane. By etching an L-shaped slot on the rectangular radiation patch, the antenna can excite two resonant modes. T...
متن کاملCharacterization of Multi - band Rectangular - Triangular Slotted Antenna
A multi-band microstrip patch antenna is developed and presented in this paper. The radiating elements in this antenna are composed of rectangular and triangular slots. These slots are engraved in the rectangular and triangular patch, joined together in one structure, and by single probe feed. The rectangular and triangular slots make the antenna to operate at multiband with relatively high gai...
متن کاملA compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کامل