Core–shell structured hollow SnO2–polypyrrole nanocomposite anodes with enhanced cyclic performance for lithium-ion batteries

نویسندگان

  • Ruiqing Liu
  • Deyu Li
  • Chen Wang
  • Ning Li
  • Qing Li
  • Xujie Lü
  • Jacob S. Spendelow
  • Gang Wu
چکیده

0.1016/j.nanoen.2 lsevier Ltd. All rig thors. : [email protected] Abstract Core–shell structured hollow SnO2–polypyrrole (PPy) nanocomposites (SnO2@PPy) with excellent electrochemical performance were synthesized using a hydrothermal method followed by an in situ chemical-polymerization route. The thickness of the polymerized amorphous PPy coating covering on the hollow SnO2 microspheres is about 25 nm, demonstrated by microscopy images. As an anode in lithium ion batteries, the nanocomposite is capable of retaining a high capacity of 448.4 mAh g 1 after 100 cycles with a coulomb efficiency above 97%. Compared to other reported SnO2 anodes, the enhanced cycling stability is attributed to the unique core–shell structure and a possible synergistic effect between the PPy coating layer and the hollow SnO2 spheres. The PPy coating not only prevents the possible pulverization of the hollow SnO2 spheres, but also prevents the SnO2/Sn spheres from aggregating. Furthermore, the hollow space within the SnO2 nanoparticles effectively mitigates the enormous volume change during charge–discharge cycling. Meanwhile, the Li diffusion coefficient in the hollow SnO2@PPy (21wt%) core–shell nanocomposite electrode is significantly improved compared to the hollow SnO2 microspheres electrode. Thus, these benefits from the PPy coating and the hollow SnO2 spheres are able to provide a robust architecture for lithium-ion battery anodes. & 2014 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synergistic effect of graphene and polypyrrole to enhance the SnO2 anode performance in lithium-ion batteries

In this work, a synergistic effect of reduced graphene oxide (rGO) and polypyrrole (PPy) was studied in terms of their promotional role to enhance the capacity and cyclic stability of hollow SnO2 anodes in lithium-ion batteries. The core–shell structured hollow SnO2/rGO/PPy nanocomposites were synthesized using a hydrothermal method followed by an in situ chemical-polymerization route. Substant...

متن کامل

The Superior Surface Discharge Capacity of Core-Shell Tinoxide/Multi Walled Carbon Nanotube Nanocomposite Anodes for Li-Ion Batteries

In this study, tin/tinoxide/multiwalled carbon nanotube (Sn/SnO2/MWCNT) nanocomposites were produced as anode materials for Li-ion batteries by a two-step process. Metallic tin was evaporated onto free-standing MWCNT buckypapers having controlled porosity and subsequently rf plasma oxidized in Ar:O2 (1:1) gas mixture. Besides, Sn/SnO2 nanocomposites were produced in the same conditions onto sta...

متن کامل

Silicon core-hollow carbon shell nanocomposites with tunable buffer voids for high capacity anodes of lithium-ion batteries.

Silicon core-hollow carbon shell nanocomposites with controllable voids between silicon nanoparticles and hollow carbon shell were easily synthesized by a two-step coating method and exhibited different charge-discharge cyclability as anodes for lithium-ion batteries. The best capacity retention can be achieved with a void/Si volume ratio of approx. 3 due to its appropriate volume change tolera...

متن کامل

Promotional role of B2O3 in enhancing hollow SnO2 anode performance for Li-ion batteries

A composite anode consisting of hollow SnO2 microspheres covered by glass-like B2O3 layers was prepared via a combined hydrothermal-impregnation method, which results in much improved electrochemical performance in lithium ion batteries, relative to pristine SnO2 anodes. The cycling and rate capabilities of the SnO2eB2O3 composite anodes were investigated as a function of B2O3 content. The bala...

متن کامل

Assembled hollow and core-shell SnO2 microspheres as anode materials for Li-ion batteries

SnO2 microspheres with controllable morphology were prepared via a hydrothermal-annealing method. The SnO2 morphology can be tuned by using AlOOH sol and g-Al2O3 as additive. The hollow SnO2 microspheres with incomplete core-shell structure prepared with small amount of g-Al2O3 presented the best cycling performance in Li-ion battery, exhibiting a specific capacity of 374.2 mAh g 1 up to 100 cy...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014