Transverse Deflections in a Cavity to the Short-range Longitudinal Wake
نویسندگان
چکیده
This note do consider a conventiona conversion target and t Since the length of the concurrent pressure pu Due K. L. Linear Collider Collaboration Tech Notes cuments a set of expressions used to explore the issue of whether or not it is reasonable to l positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the he comparison of the induced stress with the ultimate tensile strength of the target material. incident beam pulse is large in comparison to the ratio of beam size to the speed of sound, the lse dissipates in a time short compared to the overall pulse duration and one is left with only the Transverse Deflections in a Cavity to the Short-range Longitudinal Wake F. Bane, T. O. Raubenheimer, G. Stupakov, J. Wu Stanford Linear Accelerator Center Stanford University 2575 Sand Hill Road Menlo Park, CA
منابع مشابه
Thermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory
In this article, the thermo-elastic behavior of a functionally graded simple blade subjected to the mechanical and thermal loadings is presented, applying a semi-analytical method and a variable thickness cantilever beam model. A specific temperature gradient is employed between the root and the edges of the beam. It is assumed that the mechanical and thermal properties are longitudinal directi...
متن کاملThe Short-range Transverse Wake Function for Tesla Accelerating Structure
The operation of a Free Electron Laser in TESLA project requires very short bunches. It results in a very long interaction length between the bunch and the wakefields. From this fact severe problems for computer simulations arise. The longitudinal case was recently studied intensively by Novokhatski et al. [1]. In this paper we study mainly the transverse forces. Using a recently developed time...
متن کاملDesign and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow
The study of interactions of jet into cross flow at different longitudinal and transverse angles of jet was studied. The following components were designed and constructed: a low velocity wind tunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jet injection, and a spatial rake to measure the total pressure. The tests were carried out at longitudina...
متن کاملDesign and Manufacturing of Jet to free Stream Simulator to Experimental Study of Interaction of Oblique Jet in Crossflow
The study of interactions of jet into cross flow at different longitudinal and transverse angles of jet was studied. The following components were designed and constructed: a low velocity wind tunnel to produce the uniform flow, a flat plate with a traverse injection system to simulate the jet injection, and a spatial rake to measure the total pressure. The tests were carried out at longitudina...
متن کامل