Compensation Control Studies for Variable-Speed Wind Power Systems Based on Neural Network
نویسندگان
چکیده
Wind power systems have strong nonlinear characteristic, when wind speed is below the rated value. A novel intelligent hybrid maximum power point tracking (MPPT) controller for variable-speed wind power systems is designed, linear parameter-varying (LPV) gain-scheduling controller is designed to regulate output of fast-dynamics generator torque, neural network compensator is used to eliminate the interference caused by unknown parameters, WPSO algorithm is used to train neural network. Hardware-in-loop simulation model is built up based on Matlab/Xilinx, results prove that the method can effectively improve wind energy utilization efficiency, mechanical vibration of wind turbine is reduced, the maximum wind energy is captured, a better idea is provide for application of FPGA in wind power field . Streszczenie. Zaproponowano nowy system sterowania systeme elektrowni wiatrowych uwzględniający zmienność szybkości wiatru. System wykorzystuje sztuczne sieci neuronowe co szybkiego sterowania dynamiką momentu. (Kompensacyjny system sterowania elektrowniami wiatorowyumio o zmiennej szybkości wiatru – wykorzystujący sztuczne sieci neuronowe)
منابع مشابه
Intelligent Control for the Variable-Speed Variable-Pitch Wind Energy System
In this paper, a new type of multi-variable compensation control method for the wind energy conversion systems (WECS) is presented. Based on wind energy conversion systems, combining artificial neural network (ANN) control and PID, a new type of PID NN intelligent controller for steady state torque of the wind generator is designed, by which the steady state torque output is regulated to track ...
متن کاملOptimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation
In this article, a multi-objective planning is demonstrated for reactive power compensation in radial distribution networks with wind generation via unified power quality conditioner (UPQC). UPQC model, based on phase angle control (PAC), is used. In presented method, optimal locating of UPQC-PAC is done by simultaneous minimizing of objective functions such as: grid power loss, percentage of n...
متن کاملOptimal Control of a Variable-Speed Wind Energy Conversion System: A New Approach
The operation of wind energy conversion systems mainly deals with variable and unpredictable wind regimes resulting in variable power efficiency. In addition, nowadays with the presence of high penetration level of wind farms integrated to power systems, stability and power quality problems might be addressed, when a disturbance event occurs. These challenges are worsened with significant degre...
متن کاملModeling, Simulation and Control of Matrix Convert for Variable Speed Wind Turbine System
This paper presents modeling, simulation and control of matrix converter (MC) for variable speed wind turbine (VSWT) system including permanent magnet synchronous generator (PMSG). At a given wind velocity, the power available from a wind turbine is a function of its shaft speed. In order to track maximum power, the MC adjusts the PMSG shaft speed.The proposed control system allowing independen...
متن کاملImprovement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC
This paper deals with the Active and Reactive Power control of double-fed induction generator (DFIG) for variable speed wind turbine. For controlling separately the active and the reactive power generated by a DFIG, field oriented control (FOC) and indirect sliding mode control (ISMC) are presented. These non linear controls are compared on the basis of topology, cost, efficiency. The main cont...
متن کامل