Reliability and Applications of the Numerical Wave Predictions in the Black Sea
نویسنده
چکیده
This work presents a review of the last developments in the numerical wave modeling in the basin of the Black Sea. A wave prediction system, based on the SWAN (Simulating Waves Nearshore) spectral model, has been implemented and focused on the western side of the sea. Various calibrations and validation tests have been performed considering both in situ and remotely sensed measurements. We found that the most critical factors in increasing the reliability of the wave predictions are related to the physical parameterizations of the model that should be adapted to the conditions of the enclosed seas, especially the process of whitecapping, and the accuracy and the resolution of the wind fields considered to force the wave model. Some data assimilation techniques have been also implemented for various computational levels and they were found very effective in improving the reliability of the wave predictions. Up to the present moment, some sequential methods have been applied considering several approaches as Optimal Interpolation, Linear Regression and Kalman Filter. Furthermore, some practical applications of the wave prediction system are also presented and discussed. These are related to the major storms that might be expected in the Black Sea. At this point, it has to be highlighted that an important issue when building an operational wave modeling system in such difficult environments, as the enclosed seas are, would be to implement different model configurations for different events (especially as regards the severe and extreme events). Other important issues concern the use of the wave models as a tool in the effort of preventing the sea and coastal hazards and assessing also the possible coastal impact of the marine energy farms that would operate in the nearshore. Renewable energy evaluations in the Black Sea have been also performed with this system. Finally, the results of the wave predictions were also used as input in some seakeeping studies.
منابع مشابه
پیشبینی پارامترهای امواج ناشی از باد در دریای خزر با استفاده از روش درختان تصمیم رگرسیونی و شبکه های عصبی مصنوعی
Prediction of wave parameters is necessary for many applications in coastal and offshore engineering. In the literature, several approaches have been proposed to wave predictions classified as empirical based, soft-computing based and numerical based approaches. Recently, soft computing techniques such as Artificial Neural Networks (ANNs) have been used to develop wave prediction models. In thi...
متن کاملParallel implementation of underwater acoustic wave propagation using beamtracing method on graphical processing unit
The mathematical modeling of the acoustic wave propagation in seawater is the basis for realizing goals such as, underwater communication, seabed mapping, advanced fishing, oil and gas exploration, marine meteorology, positioning and explore the unknown targets within the water. However, due to the existence of various physical phenomena in the water environment and the various conditions gover...
متن کاملWave Hindcast Study of the Caspian Sea
The significant effect of waves on coastal and marine activities urges the precise identification of wave characteristics using field measurements, theoretical studies, physical modeling or numerical simulations. In order to study thoroughly the wave climate in the Caspian Sea, a wave modeling and hindcast project was performed by Iranian National Center for Oceanography. In this study, one of ...
متن کاملNumerical Simulation of Random Irregular Waves for Wave Generation in Laboratory Flumes
Understanding of wave hydrodynamics and its effects are important for engineers and scientists. Important insights may be gained from laboratory studies. Often the waves are simulated in laboratory flumes do not have the full characteristics of real sea waves. It is then necessary to present reliable methods of wave generation in wave flumes. In this paper, the results of numerically simulate...
متن کاملDesign Requirements for the Electrical Hydro-pneumatic Stations Powered by Waves in West Area of the Black Sea Using Swan Model
Wave energy production is one of the most environmentally benign ways to generate electricity. For building of the power stations, that using sea wave motion to generate hydro-pneumatic pressure, which is then transformed into electricity, is necessary to know the characteristics of the sea waves in the interest area. To obtain realistic estimated wind-generated waves for the bottom topography,...
متن کامل