Titanium boride equation of state determined by in-situ X-ray diffraction
نویسندگان
چکیده
The equation of state (EOS) of titanium boride, TiB2, was investigated by in situ X-ray diffraction in a diamond anvil cell and multianvil high-pressure apparatus. The pressure-volume-temperature (P-V-T) data were collected at up to 111 GPa and room temperature for the diamond-anvil cell experiments and at up to 15 GPa and 1300 K for the multianvil experiments. No phase transition was observed through the entire range of experimental conditions. The pressure-volume data at room temperature were fitted using a Vinet EOS to obtain the isothermal bulk modulus, BT0 = 256.7 GPa, and its pressure derivative, B' T0 = 3.83. When fitting a thermal EOS using the P-V-T data for the multianvil experiments, we find that [Formula: see text] = 0.095 (GPa/K) and α 0 = 2.49 × 10-5 K-1.
منابع مشابه
A Study of the Nanostructure and Hardness of Electron Beam Evaporated TiAlBN Coatings
TiAlBN coatings have been deposited by electron beam (EB) evaporation from a single TiAlBN material source onto AISI 316 stainless steel substrates at a temperature of 450C and substrate bias of -100 V. The stoichiometry and nanostructure have been studied by x-ray photoelectron spectroscopy, x-ray diffraction and transmission electron microscopy. The hardness and elastic modulus were determin...
متن کاملمشخصه یابی و مکانیزم تشکیل نانوکامپوزیت زمینه آلومینیمی تقویت شده با ذرات TiO2 به روش آسیاب مکانیکی
In the present study, pure Aluminum powder with 5%wt Titanium Dioxide was mechanically milled at different times. Using phase analysis through X-ray diffraction (XRD), it was found that increasing of the milling times over 10 hours causes the reduction of Titanium by Aluminum and formation of Al2O3 in the structure. Also, it was shown that if the process persists, Aluminum reacts with Titanium ...
متن کاملIN-SITU FABRICATION PROCESS OF AL- TIC COMPOSITE BY SLAG
The new in situ method for AI-TiC composite fabrication has been carried out. In this method, fabrication of AI-TiC composite by simultaneous introduction of titanium oxide and carbon into aluminum melt was investigated.. Under the process conditions, titanium and carbon reaction results in titanium carbide whiskers. The salt containing keriolite (Na3AIF6), titanium oxide (TiO2) and graphite us...
متن کاملThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing
In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...
متن کاملDetermining the optimal conditions for calcium titanate nanoparticles synthesized via mechanical alloying method
In this research, calcium titanate nanoparticles have been synthesized via mechanical alloying (MA). By changing the parameters of mechanical alloying, optimal conditions for synthesis of this compound was determined. For synthesis of this compound, a mixture of calcium hydroxide and titanium dioxide, rotation speed of 250 rpm and differnet ball to powder weight ratio was used. Phase investigat...
متن کامل