Continuous Hydrothermal Synthesis of Nano Particles Using T-shape Micro Mixer
نویسندگان
چکیده
Shin-ichiro KAWASAKI*, Yuichiro WAKASHIMA, Akira SUZUKI, Kiwamu SUE, Yukiya HAKUTA, and Kunio ARAI a Research Center for Compact Chemical Process, National Institute of Advanced Industrial Science and Technology (AIST), Nigatake 4-2-1, Miyagino-ku, Sendai, Miyagi, 983-8551, JAPAN. Fax +81-22-237-5224, E-mail [email protected] b Department of Applied Molecular Chemistry, College of Industrial Technology, Nihon University, Izumi-cho 1-2-1, Narashino, Chiba, 275-8575, JAPAN.
منابع مشابه
Influence of Micro and Nano Silica on Mechanical Properties of Plasticized Sulfur Composites
In this paper the influence of two different sizes of silica particles (micro-silica and nano-silica) was studied on mechanical properties of sulfur and sulfur composite. To improve the structural properties, sulfur was plasticized using dicyclopentadiene (DCPD) and methyl styrene (MSt). Plasticized sulfur composite was prepared by melt blending of plasticized sulfur and silica particles. T...
متن کاملHydrothermal Synthesis, Structural and Catalytic Studies of CuBi2O4 Nanoparticles
In the present work CuBi2O4 nano-spinel has been synthesized via mild hydrothermal methodat 180°C for 10 h. The synthesized nanomaterials were characterized by several techniquesto emphasis the structure and properties of produced materials. The crystal structure wasinvestigated by X-ray powder diffraction method and the values of the refined unit cell volumeand the structure properties were st...
متن کاملGas Mixing Simulation in a T-Shape Micro Channel Using The DSMC Method
Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...
متن کاملInvestigation of hydrothermal process time on the size of carbon micro- and nano-spheres
In this study, carbon nano-micro spheres with tightly controllable size, regularand perfect shape, high yields and narrow size distribution were prepared simply fromglucose and DI water as precursors using a hydrothermal method. By setting the initialconcentration of glucose solution and changing the hydrothermal process time at aconstant temperature of 160 °C, carbon spheres with various sizes...
متن کاملMicrowave-Assisted Sintering of Al–ZrO2 Nano-Composites
Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...
متن کامل