Calculation and Measurement of the Crankshaft Motion In the Bearings of a Refrigeration Compressor
نویسندگان
چکیده
منابع مشابه
The Finite Element Analysis of the Deflection of the Crankshaft of Rotary Compressor
The deflection of the crankshaft which transfers the power of motor to the pump of the compressor directly affects the vibration, noise and wear problems in the rotary compressor, therefore, with the requirement of higher reliability, it is important to obtain it exactly in compressor design. Various forces that the crankshaft suffers are calculated by theoretical analysis in the operation proc...
متن کاملOptimal Observer Path Planning For Bearings-Only Moving Targets Tracking Using Chebyshev Polynomials
In this paper, an optimization problem for the observer trajectory in the bearings-only surface moving target tracking (BOT) is studied. The BOT depends directly on the observability of the target's position in the target/observer geometry or the optimal observer maneuver. Therefore, the maximum lower band of the Fisher information matrix is opted as an independent criterion of the target estim...
متن کاملOptimal Synthesis of a Cascade Refrigeration System of LNG Through MINLP Model for Pure Refrigerant Cycles
 liquefied natural gas (LNG) is the most economical way of transporting natural gas (NG) over long distances. Liquefaction of NG by using vapor compression refrigeration system requires high operating and capital cost. Due to lack of systematic design methods for multistage refrigeration cycles, the conventional approaches of determining optimal cycle configuration are mostly based on trial-an...
متن کاملVibration Analysis of Rotary Compressors
By theoretically analyzing dynamic behavior of the crankshaft, the rolling piston and the blade inrolling-piston rotary compressors, constraint forces and sliding speed at each pair of movable machine elements were obtained, and unbalanced inertia forces and compressor vibrations were evaluated. It was concluded that theoretical results have a goodagreement with experimental ones. Moreover, it ...
متن کاملسنتز و مشخصه یابی پلی(2،2- بیس(آزیدومتیل)-3،1-پروپیلنآدیپات) به عنوان بایندر پرانرژی
polyester polyol can be used in high energy propellant as a binder.In this research, polyazido polyester was synthesized from direct polycondensation reaction between adipic acid and 2,2-bis(bromomethyl)-1,3-propanediol. Then, azidation of poly bromoester afford polyazidoester as an energetic polyester. polyazidoester have identified and characterized by FTIR,HNMR,GPC,DSC and elemental analysis...
متن کامل